Bộ nguồn 12VDC/20A (400-500VAC) SITOP PSU3800 6EP3424-8UB00-0AY0

SITOP PSU3800 12 V/20 A Regulated power supply input: 3 AC 400-500 V output: 12 V DC/20 A optimized for battery charging

6EP3424-8UB00-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. Bộ nguồn 12VDC/20A (400-500VAC) SITOP PSU3800 6EP3424-8UB00-0AY0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3424-8UB00-0AY0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6EP3424-8UB00-0AY0

Mã sản phẩm	6EP3424-8UB00-0AY0
Dòng sản phẩm	SITOP PSU3800
Hãng sản xuất	SIEMENS
Nguồn đầu vào	3 AC 400-500 V
Nguồn đầu ra	12 V DC/20 A
Kích thước (RxCxS)	70 x 125 x 125 mm
Trọng lượng	1 200 g

Chi tiết thông số kỹ thuật 6EP3424-8UB00-0AY0

Tải về datasheet (pdf): Tại đây!

Input
Input		3-phase AC
Rated voltage value Vin rated		400 … 500 V
Voltage range AC		320 … 575 V
Wide-range input		Yes
Mains buffering		at Vin = 400 V
Mains buffering at Iout rated, min.		15 ms; at Vin = 400 V
Rated line frequency 1		50 Hz
Rated line frequency 2		60 Hz
Rated line range		47 … 63 Hz
input current
● at rated input voltage 400 V		0.7 A
● at rated input voltage 500 V		0.6 A
Switch-on current limiting (+25 °C), max.		16 A
I²t, max.		0.8 A²·s
Built-in incoming fuse		none
Protection in the mains power input (IEC 898)		Required: 3-pole connected miniature circuit breaker 6 … 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)
Output
Output		Controlled, isolated DC voltage
Rated voltage Vout DC		12 V
● output voltage at output 1 at DC rated value		12 V
Total tolerance, static ±		3 %
Static mains compensation, approx.		0.1 %
Static load balancing, approx.		0.2 %
Residual ripple peak-peak, max.		100 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)		200 mV
Adjustment range		12 … 14 V
product function output voltage adjustable		Yes
Output voltage setting		via potentiometer; max. 240 W
Status display		Green LED for 12 V OK
Signaling		Relay contact (NO contact, rating 60 V DC/ 0.3 A) for 12 V OK
On/off behavior		No overshoot of Vout (soft start)
Startup delay, max.		2.5 s
voltage increase time of the output voltage maximum		500 ms
Rated current value Iout rated		20 A
Current range		0 … 20 A
● Note		+60 … +70 °C: Derating 2%/K
supplied active power typical		240 W
constant overload current
● on short-circuiting during the start-up typical		22 A
Parallel switching for enhanced performance		Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance		2
Efficiency
Efficiency at Vout rated, Iout rated, approx.		91 %
Power loss at Vout rated, Iout rated, approx.		24 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.		0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.		1 %
Load step setting time 50 to 100%, typ.		0.2 ms
Load step setting time 100 to 50%, typ.		0.2 ms
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.		2 %
Load step setting time 10 to 90%, typ.		0.2 ms
Load step setting time 90 to 10%, typ.		0.2 ms
setting time maximum		10 ms
Protection and monitoring
Output overvoltage protection		< 18 V
Current limitation, typ.		22 A
property of the output short-circuit proof		Yes
Short-circuit protection		Alternatively, constant current characteristic approx. 22 A or latching shutdown
enduring short circuit current RMS value
● typical		22 A
Overload/short-circuit indicator		LED yellow for “overload”, LED red for “latching shutdown”
Safety
Primary/secondary isolation		Yes
galvanic isolation		Safety extra low output voltage Vout according to EN 60950-1
Protection class		Class I
leakage current
● maximum		3.5 mA
● typical		0.9 mA
Degree of protection (EN 60529)		IP20
Approvals
CE mark		Yes
UL/cUL (CSA) approval		cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection		IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
certificate of suitability NEC Class 2		No
FM approval		–
CB approval		Yes
certificate of suitability EAC approval		Yes
Marine approval		ABS, DNV GL
EMC
Emitted interference		EN 55022 Class B
Supply harmonics limitation		EN 61000-3-2
Noise immunity		EN 61000-6-2
environmental conditions
ambient temperature
● during operation		-25 … +70 °C
— Note		with natural convection
● during transport		-40 … +85 °C
● during storage		-40 … +85 °C
Humidity class according to EN 60721		Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology		screw-type terminals
Connections
● Supply input		L1, L2, L3, PE: 1 screw terminal each for 0.2 … 4 mm² single-core/finely stranded
● Output		+, -: 2 screw terminals each for 0.2 … 4 mm²
● Auxiliary		13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm²; 15, 16 (Remote): 1 screw terminal each for 0.14 … 1.5 mm²
width of the enclosure		70 mm
height of the enclosure		125 mm
depth of the enclosure		125 mm
required spacing
● top		50 mm
● bottom		50 mm
● left		0 mm
● right		0 mm
Weight, approx.		1.2 kg
product feature of the enclosure housing can be lined up		Yes
Installation		Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories		Buffer module
mechanical accessories		Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20
other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3424-8UB00-0AY0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3424-8UB00-0AY0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.