Mô-đun truyền thông RFID RF120C cho SIMATIC S7-1200; 1 đầu kết nối; RS-422
6GT2002-0LA00 là mô đun mở rộng truyền thông cho PLC S7-1200 (CPU) được hãng SIEMENS phát triển & sản xuất. SIMATIC S7-1200 RF120C (6GT2002-0LA00) được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, mua hay báo giá 6GT2002-0LA00 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6GT2002-0LA00
Mã sản phẩm | 6GT2002-0LA00 |
Dòng sản phẩm | SIMATIC S7-1200 RF120C |
Hãng sản xuất | SIEMENS |
Tốc độ truyền | 115.2 kbit/s |
Cổng kết nối | 1 RS422/RS232 |
Nguồn cung cấp | 24 V DC (20-30 V DC) |
Kích thước (RxCxS) | 30x100x75 mm |
Trọng lượng | 150 g |
Chi tiết thông số kỹ thuật 6GT2002-0LA00
Tải về datasheet (pdf): Tại đây!
Input | |
Input | 1-phase AC |
● Note | Automatic range selection |
supply voltage | |
● 1 at AC rated value | 120 V |
● 2 at AC rated value | 230 V |
input voltage | |
● 1 at AC | 85 … 132 V |
● 2 at AC | 176 … 264 V |
Wide-range input | No |
Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
Mains buffering | at Vin = 93/187 V |
Mains buffering at Iout rated, min. | 20 ms; at Vin = 93/187 V |
Rated line frequency 1 | 50 Hz |
Rated line frequency 2 | 60 Hz |
Rated line range | 47 … 63 Hz |
input current | |
● at rated input voltage 120 V | 1.2 A |
● at rated input voltage 230 V | 0.67 A |
Switch-on current limiting (+25 °C), max. | 13 A |
duration of inrush current limiting at 25 °C | |
● maximum | 3 ms |
I²t, max. | 0.5 A²·s |
Built-in incoming fuse | T 3,15 A/250 V (not accessible) |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C |
Output | |
Output | Controlled, isolated DC voltage |
Rated voltage Vout DC | 24 V |
● output voltage at output 1 at DC rated value | 24 V |
Total tolerance, static ± | 3 % |
Static mains compensation, approx. | 0.1 % |
Static load balancing, approx. | 0.2 % |
Residual ripple peak-peak, max. | 150 mV |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 240 mV |
product function output voltage adjustable | No |
Output voltage setting | – |
Status display | Green LED for 24 V OK |
On/off behavior | No overshoot of Vout (soft start) |
Startup delay, max. | 6 s; 2 s at 230 V, 6 s at 120 V |
Voltage rise, typ. | 10 ms |
Rated current value Iout rated | 2.5 A |
Current range | 0 … 2.5 A |
supplied active power typical | 60 W |
short-term overload current | |
● on short-circuiting during the start-up typical | 6 A |
● at short-circuit during operation typical | 6 A |
duration of overloading capability for excess current | |
● on short-circuiting during the start-up | 100 ms |
● at short-circuit during operation | 100 ms |
Parallel switching for enhanced performance | Yes |
Numbers of parallel switchable units for enhanced performance | 2 |
Efficiency | |
Efficiency at Vout rated, Iout rated, approx. | 83 % |
Power loss at Vout rated, Iout rated, approx. | 12 W |
Closed-loop control | |
Dynamic mains compensation (Vin rated ±15 %), max. | 0.3 % |
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 3 % |
Load step setting time 50 to 100%, typ. | 5 ms |
Load step setting time 100 to 50%, typ. | 5 ms |
setting time maximum | 5 ms |
Protection and monitoring | |
Output overvoltage protection | < 33 V |
Current limitation, typ. | 2.65 A |
property of the output short-circuit proof | Yes |
Short-circuit protection | Constant current characteristic |
enduring short circuit current RMS value | |
● typical | 2.7 A |
Overload/short-circuit indicator | – |
Safety | |
Primary/secondary isolation | Yes |
galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
Protection class | Class I |
leakage current | |
● maximum | 3.5 mA |
Degree of protection (EN 60529) | IP20 |
Approvals | |
CE mark | Yes |
UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950-1, CSA C22.2 No. 60950-1) File E151273 |
Explosion protection | IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC II T4; cULus (ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455 |
certificate of suitability NEC Class 2 | No |
FM approval | Class I, Div. 2, Group ABCD, T4 |
CB approval | Yes |
certificate of suitability EAC approval | Yes |
Marine approval | ABS, BV, DNV GL, LRS, NK |
EMC | |
Emitted interference | EN 55022 Class B |
Supply harmonics limitation | not applicable |
Noise immunity | EN 61000-6-2 |
environmental conditions | |
ambient temperature | |
● during operation | 0 … 60 °C |
— Note | with natural convection |
● during transport | -40 … +85 °C |
● during storage | -40 … +85 °C |
Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
Mechanics | |
Connection technology | screw-type terminals |
Connections | |
● Supply input | L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² |
● Output | L+, M: 2 screw terminals each for 0.5 … 2.5 mm² |
● Auxiliary | – |
width of the enclosure | 70 mm |
height of the enclosure | 100 mm |
depth of the enclosure | 75 mm |
required spacing | |
● top | 20 mm |
● bottom | 20 mm |
● left | 0 mm |
● right | 0 mm |
Weight, approx. | 0.3 kg |
product feature of the enclosure housing can be lined up | Yes |
Installation | Snaps onto DIN rail EN 60715 35×7.5/15, wall mounting |
MTBF at 40 °C | 1 492 537 h |
other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối & báo giá 6GT2002-0LA00
Nếu quý khách hàng đang có nhu cầu cần tư vấn, mua hoặc báo giá 6GT2002-0LA00 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.