SIMATIC S7-1500, digital input module DI 16xDC 24V HF, 16 channels in groups of 16; input delay 0.05..20 ms; Input type 3 (IEC 61131); Diagnostics, hardware interrupts: Front connector (screw terminals or push-in) to be ordered separately
6ES7521-1BH00-0AB0 là mô đun mở rộng tín hiệu ngõ vào số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. SM 521 DI 16x24VDC HF SIMATIC S7-1500 6ES7521-1BH00-0AB0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7521-1BH00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6ES7521-1BH00-0AB0
Mã sản phẩm | 6ES7521-1BH00-0AB0 |
Dòng sản phẩm | SIMATIC S7-1500, SM 521 |
Hãng sản xuất | SIEMENS |
Số lượng đầu vào số | 16 DI 24 V DC HF |
Nguồn cung cấp | 24 V DC (20.4-28.8 V DC) |
Kích thước (RxCxS) | 35x147x129 mm |
Trọng lượng | 240 g |
Chi tiết thông số kỹ thuật 6ES7521-1BH00-0AB0
Tải về datasheet (pdf): Tại đây!
General information | |
Product type designation | DI 16x24VDC HF |
HW functional status | from FS04 |
Firmware version | V2.2.0 |
● FW update possible | Yes |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | Yes |
● Prioritized startup | Yes |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 / – |
● STEP 7 configurable/integrated from version | V5.5 SP3 / – |
● PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
● PROFINET from GSD version/GSD revision | V2.3 / – |
Operating mode | |
● DI | Yes |
● Counter | Yes |
● Oversampling | No |
● MSI | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 20 mA; with 24 V DC supply |
Power | |
Power available from the backplane bus | 1.1 W |
Power loss | |
Power loss, typ. | 2.6 W |
Digital inputs | |
Number of digital inputs | 16 |
Digital inputs, parameterizable | Yes |
Source/sink input | P-reading |
Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
Digital input functions, parameterizable | |
● Gate start/stop | Yes |
● Freely usable digital input | Yes |
● Counter | |
— Number, max. | 2 |
— Counting frequency, max. | 3 kHz |
— Counting width | 32 bit |
— Counting direction up/down | Up |
Input voltage | |
● Rated value (DC) | 24 V |
● for signal “0” | -30 to +5 V |
● for signal “1” | +11 to +30V |
Input current | |
● for signal “1”, typ. | 2.5 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.8 / 20 ms |
— at “0” to “1”, min. | 0.05 ms |
— at “0” to “1”, max. | 20 ms |
— at “1” to “0”, min. | 0.05 ms |
— at “1” to “0”, max. | 20 ms |
for interrupt inputs | |
— parameterizable | Yes |
for technological functions | |
— parameterizable | Yes |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Encoder | |
Connectable encoders | |
● 2-wire sensor | Yes |
— permissible quiescent current (2-wire sensor), max. | 1.5 mA |
Isochronous mode | |
Filtering and processing time (TCI), min. | 80 µs; At 50 μs filter time |
Bus cycle time (TDP), min. | 250 µs |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
● Hardware interrupt | Yes |
Diagnoses | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; to I < 350 µA |
● Short-circuit | No |
Diagnostics indication LED | |
● RUN LED | Yes; green LED |
● ERROR LED | Yes; red LED |
● Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
● Channel status display | Yes; green LED |
● for channel diagnostics | Yes; red LED |
● for module diagnostics | Yes; red LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels, in groups of | 16 |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C; From FS05 |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C; From FS05 |
● vertical installation, max. | 40 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Dimensions | |
Width | 35 mm |
Height | 147 mm |
Depth | 129 mm |
Weights | |
Weight, approx. | 240 g |
Nhà phân phối & báo giá 6ES7521-1BH00-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7521-1BH00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.