PS 307 120/230VAC – 24VDC/10A 6ES7307-1KA02-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V / 10 A DC

6ES7307-1KA02-0AA0 là mô đun cấp nguồn cho PLC S7-300 (CPU) do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. PS 307 120/230VAC – 24VDC/10A  6ES7307-1KA02-0AA0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1KA02-0AA0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6ES7307-1KA02-0AA0

Mã sản phẩm	6ES7307-1KA02-0AA0
Dòng sản phẩm	SIMATIC S7-300, PS 307
Hãng sản xuất	SIEMENS
Nguồn cung cấp	120/230 V AC
Nguồn đầu ra	24 V DC/ 10 A
Kích thước (RxCxS)	80x125x120 mm
Trọng lượng	800 g

Chi tiết thông số kỹ thuật 6ES7307-1KA02-0AA0

Tải về datasheet (pdf): Tại đây!

Input
Input	1-phase AC
● Note	Automatic range selection
supply voltage
● 1 at AC rated value	120 V
● 2 at AC rated value	230 V
input voltage
● 1 at AC	85 … 132 V
● 2 at AC	170 … 264 V
Wide-range input	No
Overvoltage resistance	2.3 × Vin rated, 1.3 ms
Mains buffering	at Vin = 93/187 V
Mains buffering at Iout rated, min.	20 ms; at Vin = 93/187 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 120 V	4.2 A
● at rated input voltage 230 V	1.9 A
Switch-on current limiting (+25 °C), max.	55 A
duration of inrush current limiting at 25 °C
● maximum	3 ms
I²t, max.	3.3 A²·s
Built-in incoming fuse	T 6.3 A/250 V (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: from 10 A characteristic C
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V
● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.5 %
Residual ripple peak-peak, max.	50 mV
Residual ripple peak-peak, typ.	15 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	150 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	60 mV
product function output voltage adjustable	No
Output voltage setting	–
Status display	Green LED for 24 V OK
On/off behavior	No overshoot of Vout (soft start)
Startup delay, max.	2 s
Voltage rise, typ.	10 ms
Rated current value Iout rated	10 A
Current range	0 … 10 A
supplied active power typical	240 W
short-term overload current
● on short-circuiting during the start-up typical	38 A
● at short-circuit during operation typical	38 A
duration of overloading capability for excess current
● on short-circuiting during the start-up	80 ms
● at short-circuit during operation	80 ms
Parallel switching for enhanced performance	Yes
Efficiency
Efficiency at Vout rated, Iout rated, approx.	90 %
Power loss at Vout rated, Iout rated, approx.	27 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	2 %
setting time maximum	0.1 ms
Protection and monitoring
Output overvoltage protection	Additional control loop, shutdown at < 28.8 V, automatic restart
Current limitation	11 … 12 A
property of the output short-circuit proof	Yes
Short-circuit protection	Electronic shutdown, automatic restart
enduring short circuit current RMS value
● maximum	12 A
Overload/short-circuit indicator	–
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I
leakage current
● maximum	3.5 mA
● typical	0.6 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
Explosion protection	IECEx Ex nA nC IIC T3 Gc; ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455
certificate of suitability NEC Class 2	No
FM approval	Class I, Div. 2, Group ABCD, T4
CB approval	No
certificate of suitability EAC approval	Yes
Marine approval	In S7-300 system
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	0 … 60 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
● Output	L+, M: 4 screw terminals each for 0.5 … 2.5 mm²
● Auxiliary	–
width of the enclosure	80 mm
height of the enclosure	125 mm
depth of the enclosure	120 mm
required spacing
● top	40 mm
● bottom	40 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.8 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Can be mounted onto S7 rail
mechanical accessories	Mounting adapter for standard mounting rail (6EP1971-1BA00)
MTBF at 40 °C	1 504 280 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối và báo giá 6ES7307-1KA02-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1KA02-0AA0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.