AI 4xI 2-wire HART SIMATIC ET 200SP 6ES7134-6TD00-0CA1

AI 4xI 2-wire HART SIMATIC ET 200SP 6ES7134-6TD00-0CA1

SIMATIC ET 200SP, analog HART input module, AI 4xI 2-wire HART High Feature suitable for BU type A0, A1, color code CC03, channel diagnostics, 16-bit, +/-0.3%,

6ES7134-6TD00-0CA1 là module mở rộng đầu vào tương tự (analog input module) cho ET 200SP (CPU) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC. AI 4xI 2-wire HART SIMATIC ET 200SP  6ES7134-6TD00-0CA1 được SIEMENSIM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6TD00-0CA1 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6ES7134-6TD00-0CA1

Mã sản phẩm 6ES7134-6TD00-0CA1
Dòng sản phẩm SIMATIC ET 200SP, AI 4xI 2-wire HART
Hãng sản xuất SIEMENS
Số lượng đầu vào analog AI 4xI 2-wire HART
Nguồn cung cấp 24 V DC (19.2 – 28.8 V DC)
Kích thước (RxCxS) 15 x 73 x 58 mm
Trọng lượng 31 g

Chi tiết thông số kỹ thuật 6ES7134-6TD00-0CA1

Tải về datasheet (pdf): Tại đây!

General information
Product type designation AI 4xI 2-wire HART
Firmware version V1.0
● FW update possible Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color identification plate CC03
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
● Measuring range scalable No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V13 SP1
● STEP 7 configurable/integrated from version V5.5 SP4 and higher
● PCS 7 configurable/integrated from version V8.1 SP1
● PROFIBUS from GSD version/GSD revision GSD Revision 5
● PROFINET from GSD version/GSD revision GSDML V2.3
Operating mode
● Oversampling No
● MSI No
CiR – Configuration in RUN
Reparameterization possible in RUN Yes
Calibration possible in RUN No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 25 mA; without sensor supply
Encoder supply
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes
● Output current, max. 20 mA; max. 50 mA per channel for a duration < 10 s
Power loss
Power loss, typ. 0.65 W; without sensor supply
Address area
Address space per module
● Address space per module, max. 8 byte; + 1 byte for QI information
● Address space per module with HART, max. 28 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
● Type of mechanical coding element Type A
Analog inputs
Number of analog inputs 4; Differential inputs
● For current measurement 4
permissible input current for current input (destruction limit), max. 50 mA
Input ranges (rated values), currents
● 0 to 20 mA No
● -20 mA to +20 mA No
● 4 mA to 20 mA Yes; 15 bit + sign
— Input resistance (4 mA to 20 mA) 280 Ω; + approx. 0.35 V diode forward voltage
Cable length
● shielded, max. 800 m
Analog value generation for the inputs
Measurement principle integrating (Sigma-Delta)
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit
● Integration time, parameterizable Yes; channel by channel
● Interference voltage suppression for interference frequency f1 in Hz 10 / 50 / 60 Hz
Smoothing of measured values
● Number of smoothing levels 4; None; 4/8/16 times
● parameterizable Yes
Encoder
Connection of signal encoders
● for voltage measurement No
● for current measurement as 2-wire transducer Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min. 60 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) 0.05 %
Operational error limit in overall temperature range
● Current, relative to input range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-) 0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min. 60 dB
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Limit value alarm Yes
Diagnoses
● Monitoring the supply voltage Yes
● Wire-break Yes; channel by channel
● Short-circuit Yes; Channel-by-channel, short-circuit of the encoder supply to ground or of an input to the encoder supply
● Group error Yes
● Overflow/underflow Yes; channel by channel
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics Yes; red LED
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics No
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 31 g

Phân phối & báo giá 6ES7134-6TD00-0CA1

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6TD00-0CA1 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé

Danh mục: AI ET-200SP, SIMATIC ET 200SP
Trả lời

Email của bạn sẽ không được hiển thị công khai.