AI Energy Meter 480 VAC/RC HF SIMATIC ET 200SP 6ES7134-6PA20-0CU0

AI Energy Meter 480 VAC/RC HF SIMATIC ET 200SP 6ES7134-6PA20-0CU0

SIMATIC ET 200SP, analog input module, AI Energy Meter 480V AC/RC HF for Rogowski coils, current/voltage transformer 333 mV, with network analysis functions, suitable for BU type U0, channel diagnostics

6ES7134-6PA20-0CU0 là module mở rộng đầu vào tương tự (analog input module) cho ET 200SP (CPU) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC. AI Energy Meter 480 VAC/RC HF SIMATIC ET 200SP 6ES7134-6PA20-0CU0 được SIEMENSIM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6PA20-0CU0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6ES7134-6PA20-0CU0

Mã sản phẩm 6ES7134-6PA20-0CU0
Dòng sản phẩm SIMATIC ET 200SP, AI Energy Meter 480 VAC/RC HF
Hãng sản xuất SIEMENS
Số lượng đầu vào analog AI Energy Meter 480V AC/RC HF
Nguồn cung cấp 24 V DC (19.2 – 28.8 V DC)
Kích thước (RxCxS) 20 x 73 x 58 mm
Trọng lượng 45 g

Chi tiết thông số kỹ thuật 6ES7134-6PA20-0CU0

Tải về datasheet (pdf): Tại đây!

General information
Product type designation AI Energy Meter 480 VAC/RC HF
HW functional status From FS02
Firmware version
● FW update possible Yes
usable BaseUnits BU type U0
Color code for module-specific color identification plate CC20
Supported power supply systems TT, TN, IT
Product function
● Voltage measurement Yes
— without voltage transformer Yes
— with voltage transformer Yes
● Current measurement Yes
— without current transformer No
— with current transformer No
— With Rogowski coil Yes
— With current-voltage-converter Yes; 333 mV interface
● Energy measurement Yes
● Frequency measurement Yes
● Power measurement Yes
● Active power measurement Yes
● Reactive power measurement Yes
● Power factor measurement Yes
● Active factor measurement Yes
● Reactive power compensation Yes
● Line analysis Yes
— Monitoring of instantaneous and half-wave values Yes
— THD measurement for current and voltage Yes
— Harmonics for current and voltage Yes
— Voltage dip (DIP) Yes
— Voltage swell Yes
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version STEP 7 V15 or higher
● STEP 7 configurable/integrated from version V5.5 SP3 or higher
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision V2.3
Operating mode
● Switching between operating modes in RUN Yes; For module version 32 I/20 Q, it is possible to dynamically switch between 25 user data variants, 23 of which are pre-defined and 2 of which can be defined by the specific user
● Cyclic measured value access Yes
● Acyclic measured value access Yes
● Fixed measured value sets Yes
● Freely definable measured value sets Yes; For cyclic and acyclic measured value access
CiR – Configuration in RUN
Reparameterization possible in RUN Yes
Calibration possible in RUN Yes
Installation type/mounting
Mounting position any
Supply voltage
Design of the power supply DC
Type of supply voltage 24 V DC
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Input current
Current consumption (rated value) 12.5 mA
Current consumption, max. 17 mA
Power loss
Power loss, typ. 0.4 W; 3x 230 V AC
Address area
Address space per module
● Inputs 256 byte
● Outputs 20 byte
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 2-wire connection BU type U0
Time of day
Operating hours counter
● present Yes
Analog inputs
Cycle time (all channels), typ. 50 ms; Time for consistent update of all measured and calculated values (cyclic und acyclic data)
Cable length
● shielded, max. 200 m
● unshielded, max. 30 m
Analog value generation for the inputs
Sampling frequency, max. 2 048 kHz
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm Yes
● Limit value alarm Yes
● Hardware interrupt Yes; Monitoring of up to 16 freely selectable process values (exceeding or undershooting of value)
Diagnoses
● Line quality Yes
● Supply voltage Yes
● Hardware interrupt lost Yes
● Parameter assignment error Yes
● Module fault Yes
● Channel not available Yes
● Overflow/underflow Yes
● Overload current Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes
● Channel status display Yes; green LED
● for channel diagnostics Yes; red Fn LED
● for module diagnostics Yes; green/red DIAG LED
Integrated Functions
Measuring functions
● Measuring procedure for voltage measurement TRMS
● Measuring procedure for current measurement TRMS
● Type of measured value acquisition seamless
● Curve shape of voltage Sinusoidal or distorted
● Buffering of measured variables Yes
● Parameter length 128 byte
● Bandwidth of measured value acquisition 3.2 kHz; Harmonics: 63 / 50 Hz, 52 / 60 Hz
Measuring range
— Frequency measurement, min. 45 Hz
— Frequency measurement, max. 65 Hz
Measuring inputs for voltage
— Measurable line voltage between phase and neutral conductor 300 V
— Measurable line voltage between the line conductors 519 V
— Measurable line voltage between phase and neutral conductor, min. 3 V
— Measurable line voltage between phase and neutral conductor, max. 300 V
— Measurable line voltage between the line conductors, min. 6 V
— Measurable line voltage between the line conductors, max. 519 V
— Internal resistance line conductor and neutral conductor 1.5 MΩ
— Power consumption per phase 60 mW; 300 V AC
— Impulse voltage resistance 1,2/50µs 2.5 kV
— Measurement category for voltage measurement in accordance with IEC 61010-2-030 CAT II
Measuring inputs for current (Rog. or I/U converter)
— Measurable current at AC, max. 424 mV
— Continuous voltage, maximum permissible 2 V
— Rated value, short-time withstand voltage restricted to 1 s 30 V
— Input resistance 120 kΩ
— Zero point suppression Yes; 0 … 20%, referred to the nominal current
Accuracy class according to IEC 61557-12
— Measured variable voltage 0,2
— Measured variable current 0,2
— Measured variable apparent power 0.5
— Measured variable active power 0.5
— Measured variable reactive power 1
— Measured variable power factor 0.5
— Measured variable active energy 0.5
— Measured variable reactive energy 1
— Measured variable neutral current 0,2
— Measured variable phase angle ±0.5 °; not covered by IEC 61557-12
— Measured variable frequency 0.05
— Measured variable harmonic 1
— Measured variable THDU 1
— Measured variable THDI 1
Accuracy class line analysis acc. to IEC 61000-4-30
— Measured variable voltage Class S
— Measured variable current Class S
— Measured variable frequency Class S
— Measured variable voltage interruption Class S
— Measured variable voltage dip and swell Class S
— Measured variable harmonic voltage Class S
— Measured variable harmonic current Class S
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● Between the channels and load voltage L+ Yes; Including FE
Isolation
Isolation tested with Between channels and backplane bus, 24 V supply: Routine test, 1 920 V AC, 2 s; between backplane bus and 24 V supply: Type test, 707 V DC
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C; < 0 °C as of FS02
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C; < 0 °C as of FS02
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 3 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 20 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 45 g
Other
Data for selecting a voltage transformer
● Secondary side, max. 300 V

Phân phối & báo giá 6ES7134-6PA20-0CU0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6PA20-0CU0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Danh mục: AI ET-200SP, SIMATIC ET 200SP
Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *