SIMATIC DP, Electronics module ET 200S: 2AI RTD High Feature, 15 mm width, 15 bit+sign accuracy +/-0.1%, for 2-/3-/4-wire sensors, with internal compensation of the line resistance, with SF LED (group fault)
6ES7134-4NB51-0AB0 là module mở rộng đầu vào tương tự (analog input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC. 2 AI RTD HF 15Bit SIMATIC DP ET200S 6ES7134-4NB51-0AB0 được SIEMENSIM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-4NB51-0AB0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6ES7134-4NB51-0AB0
| Mã sản phẩm | 6ES7134-4NB51-0AB0 |
| Dòng sản phẩm | SIMATIC DP, ET200S, El-Mod., 2AI RTD HF, 15Bit |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu vào tương tự | 2AI RTD High Feature |
| Nguồn cung cấp | 24 V DC |
| Kích thước (RxCxS) | 15 x 81 x 52 mm |
| Trọng lượng | 40 g |
Chi tiết thông số kỹ thuật 6ES7134-4NB51-0AB0
Tải về datasheet (pdf): Tại đây!
| General information | |
| Product function | |
| ● Isochronous mode | No |
| Supply voltage | |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V; From power module |
| ● Reverse polarity protection | Yes |
| Input current | |
| from load voltage L+ (without load), max. | 30 mA |
| from backplane bus 3.3 V DC, max. | 10 mA |
| Power loss | |
| Power loss, typ. | 0.6 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 4 byte |
| Analog inputs | |
| Number of analog inputs | 2 |
| permissible input voltage for voltage input (destruction limit), max. | 9 V |
| Constant measurement current for resistance-type transmitter, typ. | 1.25 mA |
| Cycle time (all channels) max. | Number of active channels per module x basic conversion time |
| Technical unit for temperature measurement adjustable | Yes |
| Input ranges (rated values), resistance thermometer | |
| ● Cu 10 | Yes |
| — Input resistance (Cu 10) | 10 MΩ |
| ● Ni 100 | Yes |
| — Input resistance (Ni 100) | 10 MΩ |
| ● Ni 1000 | Yes |
| — Input resistance (Ni 1000) | 10 MΩ |
| ● Ni 120 | Yes |
| — Input resistance (Ni 120) | 10 MΩ |
| ● Ni 200 | Yes |
| — Input resistance (Ni 200) | 10 MΩ |
| ● Ni 500 | Yes |
| — Input resistance (Ni 500) | 10 MΩ |
| ● Pt 100 | Yes |
| — Input resistance (Pt 100) | 10 MΩ |
| ● Pt 1000 | Yes |
| — Input resistance (Pt 1000) | 10 MΩ |
| ● Pt 200 | Yes |
| — Input resistance (Pt 200) | 10 MΩ |
| ● Pt 500 | Yes |
| — Input resistance (Pt 500) | 10 MΩ |
| Input ranges (rated values), resistors | |
| ● 0 to 150 ohms | Yes |
| — Input resistance (0 to 150 ohms) | 10 MΩ |
| ● 0 to 300 ohms | Yes |
| — Input resistance (0 to 300 ohms) | 10 MΩ |
| ● 0 to 600 ohms | Yes |
| — Input resistance (0 to 600 ohms) | 10 MΩ |
| ● 0 to 3000 ohms | Yes |
| — Input resistance (0 to 3000 ohms) | 10 MΩ |
| Thermocouple (TC) | |
| Temperature compensation | |
| — internal temperature compensation | Yes |
| Characteristic linearization | |
| ● parameterizable | Yes; for Ptxxx, Nixxx |
| — for resistance thermometer | Ptxxx, Nixxx |
| Cable length | |
| ● shielded, max. | 200 m |
| Analog value generation for the inputs | |
| Measurement principle | integrating (Sigma-Delta) |
| Integration and conversion time/resolution per channel | |
| ● Resolution with overrange (bit including sign), max. | 16 bit; for Pt100, Ni100, Ni120, Pt200, Ni200, Pt500, Ni500, Pt1000, Ni1000, Cu10: 15 bit + sign; for 150, 300, 600, 3 000 ohms: 15 bit; for PTC: 1 bit |
| ● Integration time (ms) | 16,7 / 20 ms |
| ● Interference voltage suppression for interference frequency f1 in Hz | 50 / 60 Hz |
| ● Conversion time (per channel) | Basic conversion time incl. integration time: 50 / 60 ms; additional conversion time for diagnostics of wire break test: 5 / 5 ms; additional conversion time for line compensation with 3-wire connection: 50 / 60 ms |
| Smoothing of measured values | |
| ● parameterizable | Yes; In four stages by means of digital filtering |
| ● Step: None | Yes; 1x cycle time |
| ● Step: low | Yes; 4x cycle time |
| ● Step: Medium | Yes; 32x cycle time |
| ● Step: High | Yes; 64x cycle time |
| Encoder | |
| Connection of signal encoders | |
| ● for resistance measurement with two-wire connection | Yes |
| ● for resistance measurement with three-wire connection | Yes; internal compensation of the line resistances |
| ● for resistance measurement with four-wire connection | Yes |
| Errors/accuracies | |
| Operational error limit in overall temperature range | |
| ● Resistance thermometer, relative to input range, (+/-) | Resistance-type transmitter: ±0.1 %; Pt100, Pt200, Pt500, Pt1000 standard: ±1.0 K; Pt100, Pt200, Pt500, Pt1000 climate: ±0.25 K; Ni100, Ni120, Ni200, Ni500, Ni1000 standard and climate: ±0.4 K; Cu10 ±1.5 K |
| Basic error limit (operational limit at 25 °C) | |
| ● Resistance thermometer, relative to input range, (+/-) | Resistance-type transmitter: ±0.05 %; Pt100, Pt200, Pt500, Pt1000 standard: ±0.6 K; Pt100, Pt200, Pt500, Pt1000 climate: ±0.13 K; Ni100, Ni120, Ni200, Ni500, Ni1000 standard and climate: ±0.2 K; Cu10 ±1 K |
| Interrupts/diagnostics/status information | |
| Diagnoses | |
| ● Wire-break | Yes |
| ● Group error | Yes |
| ● Overflow/underflow | Yes |
| Diagnostics indication LED | |
| ● Group error SF (red) | Yes |
| Parameter | |
| Remark | 7 byte |
| Diagnostics wire break | Disable / enable |
| Group diagnostics | Disable / enable |
| Overflow/underflow | Disable / enable |
| Potential separation | |
| Potential separation analog inputs | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● Between the channels and load voltage L+ | Yes |
| Isolation | |
| Isolation tested with | 500 V DC |
| Dimensions | |
| Width | 15 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weights | |
| Weight, approx. | 40 g |
Phân phối & báo giá 6ES7134-4NB51-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-4NB51-0AB0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
