Bộ nguồn 24VDC/30-40A (400-500VAC) SITOP PSU3800 6EP3437-8UB00-0AY0

Bộ nguồn 24VDC/30-40A (400-500VAC) SITOP PSU3800 6EP3437-8UB00-0AY0

SITOP PSU3800 24V/30-40A Stabilized power supplies Input: 3 400-500 V AC Output: 24 V/30-40 A DC optimized for battery charging

6EP3437-8UB00-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. Bộ nguồn 24VDC/30-40A (400-500VAC) SITOP PSU3800 6EP3437-8UB00-0AY0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3437-8UB00-0AY0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6EP3437-8UB00-0AY0

Mã sản phẩm 6EP3437-8UB00-0AY0
Dòng sản phẩm SITOP PSU3800
Hãng sản xuất SIEMENS
Nguồn đầu vào 3 400-500 V AC
Nguồn đầu ra 24 V/30-40 A DC
Kích thước (RxCxS) 135 x 145 x 150 mm
Trọng lượng 3 300 g

Chi tiết thông số kỹ thuật 6EP3437-8UB00-0AY0

Tải về datasheet (pdf): Tại đây!

Input
Input 3-phase AC
Rated voltage value Vin rated 400 … 500 V
Voltage range AC 320 … 575 V
Wide-range input Yes
Mains buffering at Vin = 400 V
Mains buffering at Iout rated, min. 10 ms; at Vin = 400 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 45 … 65 Hz
input current
● at rated input voltage 400 V 2.1 A
● at rated input voltage 500 V 1.7 A
Switch-on current limiting (+25 °C), max. 13 A
I²t, max. 2.24 A²·s
Protection in the mains power input (IEC 898) Required: 3-pole connected miniature circuit breaker 10 … 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
● output voltage at output 1 at DC rated value 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 0.2 %
Residual ripple peak-peak, max. 100 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV
Adjustment range 24 … 28 V
product function output voltage adjustable Yes
Output voltage setting via potentiometer; max. 960 W
Status display Green LED for 24 V OK
Signaling Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior minimal overshoot (< 3 %)
Startup delay, max. 0.1 s
voltage increase time of the output voltage maximum 100 ms
Rated current value Iout rated 40 A
Current range 0 … 40 A
● Note +60 … +70 °C: Derating 4%/K
supplied active power typical 960 W
constant overload current
● on short-circuiting during the start-up typical 48 A
Parallel switching for enhanced performance Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance 2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 94 %
Power loss at Vout rated, Iout rated, approx. 66 W
power loss [W] during no-load operation maximum 4 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 3 %
setting time maximum 10 ms
Protection and monitoring
Output overvoltage protection < 31.8 V
Current limitation, typ. 44 A
property of the output short-circuit proof Yes
Short-circuit protection Constant current characteristic approx. 44 A
enduring short circuit current RMS value
● typical 50 A
Overload/short-circuit indicator LED yellow for “overload”, LED red for “latching shutdown”
Safety
Primary/secondary isolation Yes
galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class Class I
leakage current
● maximum 1 mA
● typical 0.6 mA
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
certificate of suitability NEC Class 2 No
FM approval
CB approval Yes
certificate of suitability EAC approval Yes
Marine approval DNV GL
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation EN 61000-3-2
Noise immunity EN 61000-6-2
environmental conditions
ambient temperature
● during operation -25 … +70 °C
— Note With natural convection
● during transport -40 … +85 °C
● during storage -40 … +85 °C
Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology screw-type terminals
Connections
● Supply input L1, L2, L3, PE: 1 screw terminal each for 0.5 … 4 mm² single-core/finely stranded
● Output +: 2 screw terminals each for 0.5 … 16 mm²; -: 3 screw terminals each for 0.5 … 16 mm²
● Auxiliary 13, 14 (alarm signal), 15, 16 (Remote): 1 screw terminal each for 0.05 … 2.5 mm²
width of the enclosure 135 mm
height of the enclosure 145 mm
depth of the enclosure 150 mm
required spacing
● top 40 mm
● bottom 40 mm
● left 0 mm
● right 0 mm
Weight, approx. 3.3 kg
product feature of the enclosure housing can be lined up Yes
Installation Snaps onto DIN rail EN 60715 35×15
electrical accessories Buffer module
mechanical accessories Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20
MTBF at 40 °C 517 015 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3437-8UB00-0AY0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3437-8UB00-0AY0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Trả lời

Email của bạn sẽ không được hiển thị công khai.