Bộ nguồn 24VDC/15A (24VDC/2.5kW) SITOP UPS500S 6EP1933-2EC41

Bộ nguồn 24VDC/15A (24VDC/2.5kW) SITOP UPS500S 6EP1933-2EC41

SITOP UPS500S Maintenance free Uninterruptible Power supply With USB interface Basic device 2.5 kWs input: 24 V DC output: DC 24 V/15 A Degree of protection IP20

6EP1933-2EC41 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. , Bộ nguồn 24VDC/15A (24VDC/2.5kW) SITOP UPS500S 6EP1933-2EC41 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1933-2EC41 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6EP1933-2EC41

Mã sản phẩm 6EP1933-2EC41
Dòng sản phẩm SITOP UPS500S
Hãng sản xuất SIEMENS
Nguồn đầu vào 24 V DC
Nguồn đầu ra DC 24 V/15 A
Kích thước (RxCxS) 120 x 125 x 125 mm
Trọng lượng 1 000 g

Chi tiết thông số kỹ thuật 6EP1933-2EC41

Tải về datasheet (pdf): Tại đây!

Input
supply voltage at DC rated value 24 V
voltage curve at input DC
input voltage range 22 … 29 V DC
adjustable response value voltage for buffer connection preset 22.5 V
adjustable response value voltage for buffer connection 22 … 25.5 V; Adjustable in 0.5 V increments
input current at rated input voltage 24 V rated value 15.2 A; + approx. 2.3 A with empty energy storage (capacitor)
Mains buffering
type of energy storage with capacitors
design of the mains power cut bridging-connection 15 A for 3 s or 10 A for 6 s or 5 A for 15 s or 2 A for 38 s; longer buffering times with expansion modules
energy content of energy storage 2.5 kW.s
charging current 1 A, 2 A
adjustable charging current maximum note factory setting approx. 1 A
Output
output voltage
● in normal operation at DC rated value 24 V
● in buffering mode at DC rated value 24 V
formula for output voltage 24 V ± 3 %
startup delay time typical 0.6 s
voltage increase time of the output voltage typical 25 ms
output voltage in buffering mode at DC 24 … 24.7 V
output current
● rated value 15 A
● in normal operation 0 … 15 A
● in buffering mode 0 … 15 A
peak current 25 A
property of the output short-circuit proof Yes
supplied active power typical 360 W
Efficiency
efficiency in percent
● at rated output voltage for rated value of the output current typical 97.5 %
power loss [W]
● at rated output voltage for rated value of the output current typical 9 W
Protection and monitoring
product function
● reverse polarity protection against energy storage unit polarity reversal Yes
● reverse polarity protection against input voltage polarity reversal Yes
Signaling
display version
● for normal operation Normal operation: LED green (OK), floating changeover contact “OK/Bat” to setting “OK” (“OK” means: Voltage of the supplying power supply unit is greater than cut-in threshold set at the DC UPS module); lack of buffer standby: LED red (ALARM), floating changeover contact “ALARM/BAT” to setting “ALARM”; energy storage > 85%: LED green (BAT > 85%), floating NO contact “BAT > 85” closed; permissible contact current capacity: DC 60 V/1 A or AC 30 V /1 A
● in buffering mode Buffered mode: LED yellow (BAT), floating changeover contact “OK/BAT” to setting “BAT”; Prewarning buffer end after expiry of 80% of the available buffer time: LED red (ALARM), floating changeover contact “ALARM/BAT” to setting “ALARM”; Energy storage > 85%: LED green (BAT > 85%), floating NO contact “BAT > 85” closed
Interface
product component PC interface Yes
design of the interface USB
Safety
galvanic isolation between input and output No
operating resource protection class Class III
protection class IP IP20
Approvals
certificate of suitability
● CE marking Yes
● as approval for USA cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
● relating to ATEX
● C-Tick Yes
shipbuilding approval ABS, DNV GL
EMC
standard
● for emitted interference EN 55022 Class B
● for interference immunity EN 61000-6-2
environmental conditions
ambient temperature
● during operation 0 … 60 °C; with natural convection
● during transport -40 … +70 °C
● during storage -40 … +70 °C
environmental category acc. to IEC 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
type of electrical connection screw-type terminals
● at input 24 V DC: 2 screw terminals for 1 … 4 mm²/17 … 11 AWG
● at output 24 V DC: 4 screw terminals for 1 … 4 mm²/17 … 11 AWG
● for rechargeable battery module
● for control circuit and status message 10 screw terminals for 0.5 … 2.5 mm²/20 … 13 AWG
width of the enclosure 120 mm
height of the enclosure 125 mm
depth of the enclosure 125 mm
required spacing
● top 50 mm
● bottom 50 mm
● left 0 mm
● right 0 mm
net weight 1 kg
product feature of the enclosure housing can be lined up Yes
fastening method Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories Extension module SITOP UPS501S
MTBF at 40 °C 638 570 h
reference code acc. to IEC 81346-2 T
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1933-2EC41

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1933-2EC41 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Danh mục: UPS500S, Bộ Nguồn 24 V DC
Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *