PM 1507 24VDC/8A SIMATIC S7-1500 SIEMENS 6EP1333-4BA00

PM 1507 24VDC/8A SIMATIC S7-1500 SIEMENS 6EP1333-4BA00

SIMATIC PM 1507 24 V/8 A Regulated power supply for SIMATIC S7-1500 input: 120/230 V AC, output: 24 V DC/8

6EP1333-4BA00 là mô đun nguồn cấp cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. PM 1507 24VDC/8A SIMATIC S7-1500 SIEMENS 6EP1333-4BA00 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6EP1333-4BA00 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6EP1333-4BA00A

Mã sản phẩm 6EP1333-4BA00
Dòng sản phẩm SIMATIC S7-1500, PM 1507
Hãng sản xuất SIEMENS
Nguồn đầu vào 120 V AV (85 … 132 V AC)/230 V AC (170 … 264 V AC)
Nguồn đầu ra 24 V DC/8 A
Kích thước (RxCxS) 75x147x129 mm
Trọng lượng 740 g

Chi tiết thông số kỹ thuật 6EP1333-4BA00

Tải về datasheet (pdf): Tại đây!

Input
Input 1-phase AC
● Note Automatic range selection
supply voltage
● 1 at AC rated value 120 V
● 2 at AC rated value 230 V
input voltage
● 1 at AC 85 … 132 V
● 2 at AC 170 … 264 V
Wide-range input No
Overvoltage resistance 2.3 × Vin rated, 1.3 ms
Mains buffering at Vin = 93/187 V
Mains buffering at Iout rated, min. 20 ms; at Vin = 93/187 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 45 … 65 Hz
input current
● at rated input voltage 120 V 3.7 A
● at rated input voltage 230 V 1.7 A
Switch-on current limiting (+25 °C), max. 62 A
duration of inrush current limiting at 25 °C
● maximum 3 ms
I²t, max. 12 A²·s
Built-in incoming fuse T 6.3 A/250 V (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
● output voltage at output 1 at DC rated value 24 V
Total tolerance, static ± 1 %
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 0.1 %
Residual ripple peak-peak, max. 50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 150 mV
product function output voltage adjustable No
Status display LED green for 24 V OK; LED red for error; LED yellow for stand-by
On/off behavior No overshoot of Vout (soft start)
Startup delay, max. 1.5 s
Voltage rise, typ. 10 ms
Rated current value Iout rated 8 A
Current range 0 … 8 A
supplied active power typical 192 W
short-term overload current
● on short-circuiting during the start-up typical 35 A
● at short-circuit during operation typical 35 A
duration of overloading capability for excess current
● on short-circuiting during the start-up 70 ms
● at short-circuit during operation 70 ms
Parallel switching for enhanced performance Yes
Numbers of parallel switchable units for enhanced performance 2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 90 %
Power loss at Vout rated, Iout rated, approx. 21 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 2 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. 3 %
Load step setting time 10 to 90%, typ. 5 ms
Load step setting time 90 to 10%, typ. 5 ms
setting time maximum 5 ms
Protection and monitoring
Output overvoltage protection Additional control loop, limitation (closed loop control) at < 28.8 V
Current limitation 8.4 … 9.6 A
Current limitation, typ. 9 A
property of the output short-circuit proof Yes
Short-circuit protection Electronic shutdown, automatic restart
Overload/short-circuit indicator
Safety
Primary/secondary isolation Yes
galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2
Protection class Class I
leakage current
● maximum 3.5 mA
● typical 1.3 mA
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
Explosion protection IECEx Ex nA nC IIC T3 Gc; ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T3, File E330455
certificate of suitability NEC Class 2 No
FM approval Class I, Div. 2, Group ABCD, T4
CB approval Yes
certificate of suitability EAC approval Yes
Marine approval ABS, BV, DNV GL
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation EN 61000-3-2
Noise immunity EN 61000-6-2
environmental conditions
ambient temperature
● during operation 0 … 60 °C
— Note with natural convection
● during transport -40 … +85 °C
● during storage -40 … +85 °C
Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology Screw-/spring clamp connection
Connections
● Supply input L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm²
● Output L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²
product function
● removable terminal at input Yes
● removable terminal at output Yes
width of the enclosure 75 mm
height of the enclosure 147 mm
depth of the enclosure 129 mm
required spacing
● top 40 mm
● bottom 40 mm
● left 0 mm
● right 0 mm
Weight, approx. 0.74 kg
product feature of the enclosure housing can be lined up Yes
Installation Can be mounted onto S7-1500 rail
MTBF at 40 °C 1 362 918 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Nhà phân phối & báo giá 6EP1333-4BA00

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-4BA00 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Danh mục: Nguồn S7-1500, Bộ Nguồn 24 V DC, SIMATIC S7-1500
Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *