Bộ nguồn 24VDC/5A (120-230/230-500VAC) SITOP PSU200M 6EP1333-3BA10-8AC0

Bộ nguồn 24VDC/5A (120-230/230-500VAC) SITOP PSU200M 6EP1333-3BA10-8AC0

SITOP PSU200M plus 5 A Stabilized power supply input: AC 120-230/230-500 V output: 24 V DC/5 A Option for with protective varnish

6EP1333-3BA10-8AC0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. Bộ nguồn 24VDC/5A (120-230/230-500VAC) SITOP PSU200M 6EP1333-3BA10-8AC0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-3BA10-8AC0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6EP1333-3BA10-8AC0

Mã sản phẩm 6EP1333-3BA10-8AC0
Dòng sản phẩm SITOP PSU200M
Hãng sản xuất SIEMENS
Nguồn đầu vào AC 120-230/230-500 V
Nguồn đầu ra 24 V DC/5 A
Kích thước (RxCxS) 70 x 125 x 121 mm
Trọng lượng 600 g

Chi tiết thông số kỹ thuật 6EP1333-3BA10-8AC0

Tải về datasheet (pdf): Tại đây!

Input
Input 1-phase and 2-phase AC
● Note Set by means of selector switch on the device; starting from Vin > 90/180 V
supply voltage
● 1 at AC 120 … 230 V
● 2 at AC 230 … 500 V
input voltage
● 1 at AC 85 … 264 V
● 2 at AC 176 … 550 V
Wide-range input Yes
Overvoltage resistance 1300 Vpeak, 1.3 ms
Mains buffering at Vin = 120/230 V, typ. 150 ms at Vin = 400 V
Mains buffering at Iout rated, min. 25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 47 … 63 Hz
input current
● at rated input voltage 120 V 2.2 A
● at rated input voltage 230 V 1.2 A
● at rated input voltage 500 V 0.61 A
Switch-on current limiting (+25 °C), max. 35 A
I²t, max. 1.7 A²·s
Built-in incoming fuse T 3.15 A (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
● output voltage at output 1 at DC rated value 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 0.1 %
Residual ripple peak-peak, max. 50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 200 mV
Adjustment range 24 … 28.8 V
product function output voltage adjustable Yes
Output voltage setting via potentiometer
Status display Green LED for 24 V OK
Signaling Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior Overshoot of Vout approx. 3 %
Startup delay, max. 1 s
Voltage rise, typ. 50 ms
Rated current value Iout rated 5 A
Current range 0 … 5 A
supplied active power typical 120 W
short-term overload current
● at short-circuit during operation typical 15 A
duration of overloading capability for excess current
● at short-circuit during operation 25 ms
constant overload current
● on short-circuiting during the start-up typical 6 A
Parallel switching for enhanced performance Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance 2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 88 %
Power loss at Vout rated, Iout rated, approx. 17 W
power loss [W] during no-load operation maximum 4 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 3 %
Load step setting time 50 to 100%, typ. 2 ms
Load step setting time 100 to 50%, typ. 2 ms
setting time maximum 5 ms
Protection and monitoring
Output overvoltage protection < 35 V
Current limitation, typ. 6 A
property of the output short-circuit proof Yes
Short-circuit protection Alternatively, constant current characteristic approx. 5.5 A or latching shutdown
enduring short circuit current RMS value
● typical 6 A
Overload/short-circuit indicator LED yellow for “overload”, LED red for “latching shutdown”
Safety
Primary/secondary isolation Yes
galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class Class I
leakage current
● maximum 3.5 mA
● typical 0.25 mA
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3
certificate of suitability NEC Class 2 No
FM approval
CB approval No
certificate of suitability EAC approval Yes
Marine approval ABS, DNV GL
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation EN 61000-3-2
Noise immunity EN 61000-6-2
environmental conditions
ambient temperature
● during operation -25 … +70 °C
— Note with natural convection
● during transport -40 … +85 °C
● during storage -40 … +85 °C
Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology screw-type terminals
Connections
● Supply input L, N, PE: 1 screw terminal each for 0.2 … 2.5 mm² single-core/finely stranded
● Output +, -: 2 screw terminals each for 0.2 … 2.5 mm²
● Auxiliary 13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm²
width of the enclosure 70 mm
height of the enclosure 125 mm
depth of the enclosure 121 mm
required spacing
● top 50 mm
● bottom 50 mm
● left 0 mm
● right 0 mm
Weight, approx. 0.6 kg
product feature of the enclosure housing can be lined up Yes
Installation Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories Buffer module
MTBF at 40 °C 1 123 973 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1333-3BA10-8AC0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-3BA10-8AC0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Danh mục: SITOP PSU200M, Bộ Nguồn 24 V DC
Để lại một bình luận

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *