Bộ nguồn 24VDC/10A (120-230/230-500VAC) SITOP PSU200M 6EP1334-3BA10-8AB0

SITOP PSU200M plus 10 A Stabilized power supply input: AC 120-230/230-500 V output: DC 24 V/10 A Option for with protective varnish

6EP1334-3BA10-8AB0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. Bộ nguồn 24VDC/10A (120-230/230-500VAC) SITOP PSU200M 6EP1334-3BA10-8AB0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1334-3BA10-8AB0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6EP1334-3BA10-8AB0

Mã sản phẩm	6EP1334-3BA10-8AB0
Dòng sản phẩm	SITOP PSU200M
Hãng sản xuất	SIEMENS
Nguồn đầu vào	AC 120-230/230-500 V
Nguồn đầu ra	DC 24 V/10 A
Kích thước (RxCxS)	70 x 125 x 121 mm
Trọng lượng	800 g

Chi tiết thông số kỹ thuật 6EP1334-3BA10-8AB0

Tải về datasheet (pdf): Tại đây!

Input
Input	1-phase and 2-phase AC
● Note	Set by means of selector switch on the device
supply voltage
● 1 at AC	120 … 230 V
● 2 at AC	230 … 500 V
input voltage
● 1 at AC	85 … 264 V
● 2 at AC	176 … 550 V
Wide-range input	Yes
Overvoltage resistance	1300 Vpeak, 1.3 ms
Mains buffering	at Vin = 120/230 V, typ. 150 ms at Vin = 400 V
Mains buffering at Iout rated, min.	25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 120 V	4.4 A
● at rated input voltage 230 V	2.4 A
● at rated input voltage 500 V	1.1 A
Switch-on current limiting (+25 °C), max.	35 A
I²t, max.	4 A²·s
Built-in incoming fuse	T 6.3 A (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V
● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.1 %
Residual ripple peak-peak, max.	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	200 mV
Adjustment range	24 … 28.8 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer
Status display	Green LED for 24 V OK
Signaling	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior	Overshoot of Vout approx. 3 %
Startup delay, max.	1 s
Voltage rise, typ.	50 ms
Rated current value Iout rated	10 A
Current range	0 … 10 A
● Note	+60 … +70 °C: Derating 2%/K (at 120 V, 230 V) or 3.5%/K (at 400 V)
supplied active power typical	240 W
short-term overload current
● at short-circuit during operation typical	30 A
duration of overloading capability for excess current
● at short-circuit during operation	25 ms
constant overload current
● on short-circuiting during the start-up typical	12 A
Parallel switching for enhanced performance	Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	91 %
Power loss at Vout rated, Iout rated, approx.	24 W
power loss [W] during no-load operation maximum	6 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	3 %
Load step setting time 50 to 100%, typ.	2 ms
Load step setting time 100 to 50%, typ.	2 ms
setting time maximum	5 ms
Protection and monitoring
Output overvoltage protection	< 35 V
Current limitation, typ.	12 A
property of the output short-circuit proof	Yes
Short-circuit protection	Alternatively, constant current characteristic approx. 12 A or latching shutdown
enduring short circuit current RMS value
● typical	12 A
Overload/short-circuit indicator	LED yellow for “overload”, LED red for “latching shutdown”
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I
leakage current
● maximum	3.5 mA
● typical	0.32 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	No
certificate of suitability EAC approval	Yes
Marine approval	ABS, DNV GL
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +70 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L, N, PE: 1 screw terminal each for 0.2 … 2.5 mm² single-core/finely stranded
● Output	+, -: 2 screw terminals each for 0.2 … 2.5 mm²
● Auxiliary	13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm²
width of the enclosure	70 mm
height of the enclosure	125 mm
depth of the enclosure	121 mm
required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.8 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories	Buffer module
MTBF at 40 °C	1 055 408 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1334-3BA10-8AB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1334-3BA10-8AB0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.