SIMATIC S7-1500, digital output module DQ 8×24 V DC/2A HF; 8 channels in groups of 8; 8 A per group; diagnostics; substitute value: the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately

6ES7522-1BF00-0AB0 là mô đun mở rộng tín hiệu ngõ ra số cho PLC S7-1500 (CPU) do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. SM 522 DQ 8x24VDC/2A HF SIEMENS 6ES7522-1BF00-0AB0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7522-1BF00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Mục lục

Tóm tắt thông số kỹ thuật 6ES7522-1BF00-0AB0

Mã sản phẩm	6ES7522-1BF00-0AB0
Dòng sản phẩm	SIMATIC S7-1500, SM 522
Hãng sản xuất	SIEMENS
Số lượng đầu ra số	8 DQ 24 V DC/2A HF
Nguồn cung cấp	24 V DC (20.4-28.8 V DC)
Kích thước (RxCxS)	35x147x129 mm
Trọng lượng	240 g

Chi tiết thông số kỹ thuật 6ES7522-1BF00-0AB0

Tải về datasheet (pdf): Tại đây!

General information
Product type designation	DQ 8x24VDC/2A HF
HW functional status	FS03
Firmware version	V2.2.0
● FW update possible	Yes
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	No
● Prioritized startup	Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V13 SP1 / –
● STEP 7 configurable/integrated from version	V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision	V1.0 / V5.1
● PROFINET from GSD version/GSD revision	V2.3 / –
Operating mode
● DQ	Yes
● DQ with energy-saving function	Yes; with an application
● PWM	Yes
● Cam control (switching at comparison values)	No
● Oversampling	No
● MSO	Yes
● Integrated operating cycle counter	Yes
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes; through internal protection with 10 A per group
Input current
Current consumption, max.	40 mA; 20 mA per group, no output is activated.
Output voltage
Rated value (DC)	24 V
Power
Power available from the backplane bus	0.9 W
Power loss
Power loss, typ.	5.6 W; 6.8 W for PWM operation
Digital outputs
Type of digital output	Transistor
Number of digital outputs	8
Current-sourcing	Yes
Digital outputs, parameterizable	Yes
Short-circuit protection	Yes
● Response threshold, typ.	3 A
Limitation of inductive shutdown voltage to	-17 V
Controlling a digital input	Yes
Digital output functions, parameterizable
● Freely usable digital output	Yes
● PWM output	Yes
— Number, max.	2
— Cycle duration, parameterizable	Yes; 2 … 100 ms continuous
— ON period, min.	0 %
— ON period, max.	100 %
— Resolution of the duty cycle	0.1 %
— Minimum pulse duration	300 µs
Switching capacity of the outputs
● on lamp load, max.	10 W
Load resistance range
● lower limit	12 Ω
● upper limit	4 kΩ
Output voltage
● for signal “1”, min.	L+ (-0.8 V)
Output current
● for signal “1” rated value	2 A
● for signal “1” permissible range, max.	2.4 A; note derating specification for PWM operation
● for signal “0” residual current, max.	0.5 mA
Output delay with resistive load
● “0” to “1”, typ.	80 µs
● “0” to “1”, max.	100 µs
● “1” to “0”, typ.	300 µs
● “1” to “0”, max.	500 µs
Parallel switching of two outputs
● for logic links	Yes
● for uprating	No
● for redundant control of a load	Yes
Switching frequency
● with resistive load, max.	100 Hz; With PWM operation: 500 Hz
● with inductive load, max.	0.5 Hz; According to IEC 60947-5-1, DC-13; max. 500 Hz with PWM operation only with external circuit; see additional description in the manual
● on lamp load, max.	10 Hz
Total current of the outputs
● Current per channel, max.	2 A; see additional description in the manual
● Current per group, max.	8 A; see additional description in the manual
● Current per module, max.	16 A; see additional description in the manual
Cable length
● shielded, max.	1 000 m
● unshielded, max.	600 m
Interrupts/diagnostics/status information
Diagnostics function	Yes
Substitute values connectable	Yes
Alarms
● Diagnostic alarm	Yes
● Maintenance interrupt	Yes
Diagnoses
● Monitoring the supply voltage	Yes
● Wire-break	No
● Short-circuit	Yes
● Group error	Yes
Diagnostics indication LED
● RUN LED	Yes; green LED
● ERROR LED	Yes; red LED
● MAINT LED	Yes; Yellow LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green LED
● Channel status display	Yes; green LED
● for channel diagnostics	Yes; red LED
● for module diagnostics	Yes; red LED
Potential separation
Potential separation channels
● between the channels	No
● between the channels, in groups of	4
● between the channels and backplane bus	Yes
Isolation
Isolation tested with	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No
Suitable for safety-related tripping of standard modules	Yes; From FS03
Highest safety class achievable for safety-related tripping of standard modules
● Performance level according to ISO 13849-1	PL d
● Category according to ISO 13849-1	Cat. 3
● SILCL according to IEC 62061	SILCL 2
Ambient conditions
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width	35 mm
Height	147 mm
Depth	129 mm
Weights
Weight, approx.	240 g

Nhà phân phối & báo giá 6ES7522-1BF00-0AB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7522-1BF00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.