SIMATIC ET 200SP, Analog input module, AI 2xU Standard Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit

6ES7134-6FB00-0BA1 là module mở rộng đầu vào tương tự (analog input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC. AI 2xU ST SIMATIC ET 200SP 6ES7134-6FB00-0BA1 được SIEMENSIM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6FB00-0BA1 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Mục lục

Tóm tắt thông số kỹ thuật 6ES7134-6FB00-0BA1

Mã sản phẩm	6ES7134-6FB00-0BA1
Dòng sản phẩm	SIMATIC ET 200SP, AI 2xU ST
Hãng sản xuất	SIEMENS
Số lượng đầu vào analog	AI 2xU
Nguồn cung cấp	24 V DC (19.2 – 28.8 V DC)
Kích thước (RxCxS)	15 x 73 x 58 mm
Trọng lượng	31 g

Chi tiết thông số kỹ thuật 6ES7134-6FB00-0BA1

Tải về datasheet (pdf): Tại đây!

General information
Product type designation	AI 2xU ST
HW functional status	from FS04
Firmware version
● FW update possible	Yes
usable BaseUnits	BU type A0, A1
Color code for module-specific color identification plate	CC00
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	No
● Measuring range scalable	No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V13 SP1
● STEP 7 configurable/integrated from version	V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision	GSDML V2.3
Operating mode
● Oversampling	No
● MSI	No
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes
Calibration possible in RUN	No
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Input current
Current consumption, max.	37 mA
Encoder supply
24 V encoder supply
● 24 V	No
Additional 24 V encoder supply
● 24 V	No
Power loss
Power loss, typ.	0.9 W
Address area
Address space per module
● Address space per module, max.	4 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding	Yes
● Mechanical coding element	Yes
● Type of mechanical coding element	Type A
Selection of BaseUnit for connection variants
● 1-wire connection	BU type A0, A1
● 2-wire connection	BU type A0, A1
Analog inputs
Number of analog inputs	2
● For voltage measurement	2
permissible input voltage for voltage input (destruction limit), max.	30 V
Cycle time (all channels), min.	500 µs
Input ranges (rated values), voltages
● 0 to +10 V	Yes; 15 bit
— Input resistance (0 to 10 V)	180 kΩ
● 1 V to 5 V	Yes; 15 bit
— Input resistance (1 V to 5 V)	180 kΩ
● -10 V to +10 V	Yes; 16 bit incl. sign
— Input resistance (-10 V to +10 V)	180 kΩ
● -5 V to +5 V	Yes; 16 bit incl. sign
— Input resistance (-5 V to +5 V)	180 kΩ
Cable length
● shielded, max.	200 m
Analog value generation for the inputs
Measurement principle	Sigma Delta
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	16 bit
● Integration time, parameterizable	Yes
● Interference voltage suppression for interference frequency f1 in Hz	16.6 / 50 / 60 Hz / off
● Conversion time (per channel)	50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 250 µs without filter
Smoothing of measured values
● Number of smoothing levels	4
● parameterizable	Yes
● Step: None	Yes; 1x cycle time
● Step: low	Yes; 4x cycle time
● Step: Medium	Yes; 8x cycle time
● Step: High	Yes; 16x cycle time
Encoder
Connection of signal encoders
● for voltage measurement	Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.01 %
Temperature error (relative to input range), (+/-)	0.005 %/K
Crosstalk between the inputs, min.	-50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.05 %
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-)	0.5 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-)	0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min.	70 dB
● Common mode voltage, max.	10 V
● Common mode interference, min.	90 dB
Interrupts/diagnostics/status information
Diagnostics function	Yes
Alarms
● Diagnostic alarm	Yes
● Limit value alarm	No
Diagnoses
● Monitoring the supply voltage	Yes
● Wire-break	No
● Short-circuit	Yes; at 1 to 5 V
● Group error	Yes
● Overflow/underflow	Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
● Channel status display	Yes; green LED
● for channel diagnostics	No
● for module diagnostics	Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels	No
● between the channels and backplane bus	Yes
● between the channels and the power supply of the electronics	Yes
Permissible potential difference
between the inputs (UCM)	10 Vpp
Isolation
Isolation tested with	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	-30 °C; < 0 °C as of FS04
● horizontal installation, max.	60 °C
● vertical installation, min.	-30 °C; < 0 °C as of FS04
● vertical installation, max.	50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width	15 mm
Height	73 mm
Depth	58 mm
Weights
Weight, approx.	31 g

Phân phối & báo giá 6ES7134-6FB00-0BA1

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6FB00-0BA1 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.