SITOP PSU100S 24 V/10 A Stabilized power supply input: 120/230 V AC, output: DC 24 V/10 A

6EP1334-2BA20 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. Bộ nguồn 24VDC/10A (120/230VAC) SITOP PSU100S 6EP1334-2BA20 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1334-2BA20 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Mục lục

Tóm tắt thông số kỹ thuật 6EP1334-2BA20

Mã sản phẩm	6EP1334-2BA20
Dòng sản phẩm	SITOP PSU100S
Hãng sản xuất	SIEMENS
Nguồn đầu vào	120/230 V AC
Nguồn đầu ra	DC 24 V/10 A
Kích thước (RxCxS)	70 x 125 x 120 mm
Trọng lượng	800 g

Chi tiết thông số kỹ thuật 6EP1334-2BA20

Tải về datasheet (pdf): Tại đây!

Input
Input		1-phase AC
● Note		Automatic range selection
supply voltage
● 1 at AC rated value		120 V
● 2 at AC rated value		230 V
input voltage
● 1 at AC		85 … 132 V
● 2 at AC		170 … 264 V
Wide-range input		No
Overvoltage resistance		2.3 × Vin rated, 1.3 ms
Mains buffering		at Vin = 93/187 V
Mains buffering at Iout rated, min.		20 ms; at Vin = 93/187 V
Rated line frequency 1		50 Hz
Rated line frequency 2		60 Hz
Rated line range		47 … 63 Hz
input current
● at rated input voltage 120 V		4.49 A
● at rated input voltage 230 V		1.91 A
Switch-on current limiting (+25 °C), max.		60 A
I²t, max.		5.6 A²·s
Built-in incoming fuse		T 6.3 A/250 V (not accessible)
Protection in the mains power input (IEC 898)		Recommended miniature circuit breaker: from 10 A characteristic C
Output
Output		Controlled, isolated DC voltage
Rated voltage Vout DC		24 V

● output voltage at output 1 at DC rated value		24 V
Total tolerance, static ±		3 %
Static mains compensation, approx.		0.1 %
Static load balancing, approx.		1 %
Residual ripple peak-peak, max.		150 mV
Residual ripple peak-peak, typ.		20 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)		240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)		160 mV
Adjustment range		22.8 … 28 V
product function output voltage adjustable		Yes
Output voltage setting		via potentiometer
Status display		Green LED for 24 V OK
Signaling		Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior		Overshoot of Vout < 3 %
Startup delay, max.		0.3 s
Voltage rise, typ.		20 ms
Rated current value Iout rated		10 A
Current range		0 … 12 A
● Note		12 A up to +45°C; +60 … +70 °C: Derating 3%/K
supplied active power typical		288 W
short-term overload current
● on short-circuiting during the start-up typical		32 A
● at short-circuit during operation typical		32 A
duration of overloading capability for excess current
● on short-circuiting during the start-up		1 000 ms
● at short-circuit during operation		1 000 ms
Parallel switching for enhanced performance		Yes
Numbers of parallel switchable units for enhanced performance		2
Efficiency
Efficiency at Vout rated, Iout rated, approx.		90 %
Power loss at Vout rated, Iout rated, approx.		25 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.		0.3 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.		3 %
Load step setting time 10 to 90%, typ.		1 ms
Load step setting time 90 to 10%, typ.		1 ms
Protection and monitoring
Output overvoltage protection		protection against overvoltage in case of internal fault Vout < 33 V
Current limitation		12 … 14.6 A
property of the output short-circuit proof		Yes
Short-circuit protection		Constant current characteristic
enduring short circuit current RMS value
● typical		14.6 A
overcurrent overload capability in normal operation		overload capability 150 % Iout rated up to 5 s/min
Overload/short-circuit indicator		–
Safety
Primary/secondary isolation		Yes
galvanic isolation		Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class		Class I
leakage current
● maximum		3.5 mA
● typical		0.8 mA
Degree of protection (EN 60529)		IP20
Approvals
CE mark		Yes
UL/cUL (CSA) approval		cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection		IECEx Ex ec nC IIC T4 Gc; ATEX (EX) II 3G Ex ec nC IIC T4 Gc; cULus Class I Div. 2 (ANSI/ISA-12.12.01-2007, CSA C22.2 No. 213) Group ABCD, T4; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
certificate of suitability NEC Class 2		No
FM approval		–
CB approval		Yes
certificate of suitability EAC approval		Yes
Marine approval		BV, DNV GL
EMC
Emitted interference		EN 55022 Class B
Supply harmonics limitation		EN 61000-3-2
Noise immunity		EN 61000-6-2
environmental conditions
ambient temperature
● during operation		-25 … +70 °C
— Note		with natural convection
● during transport		-40 … +85 °C
● during storage		-40 … +85 °C
Humidity class according to EN 60721		Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology		screw-type terminals
Connections
● Supply input		L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
● Output		+, -: 2 screw terminals each for 0.5 … 2.5 mm²
● Auxiliary		Alarm signals: 2 screw terminals for 0.5 … 2.5 mm²
● signaling contact		2 screw terminals for 0.5 … 2.5 mm²
width of the enclosure		70 mm
height of the enclosure		125 mm
depth of the enclosure		120 mm
required spacing
● top		50 mm
● bottom		50 mm
● left		0 mm
● right		0 mm
Weight, approx.		0.8 kg
product feature of the enclosure housing can be lined up		Yes
Installation		Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories		Buffer module
mechanical accessories		Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20
MTBF at 40 °C		1 614 510 h
other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1334-2BA20

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1334-2BA20 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.