SIMATIC S7-400, digital output SM 422, isolated 32 DO; 24 V DC, 0.5 A with 0.15 ms output delay, diagnostics
6ES7422-7BL00-0AB0 là mô-đun mở rộng đầu ra số cho PLC S7-400 (CPU) do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-400. SM 422 32DO 24VDC 0.5A SIMATIC S7-400 6ES7422-7BL00-0AB0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7422-7BL00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6ES7422-7BL00-0AB0
| Mã sản phẩm | 6ES7422-7BL00-0AB0 |
| Dòng sản phẩm | SIMATIC S7-400, SM 422 |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu ra số | 32 DO; 24 V DC, 0.5 A |
| Nguồn cung cấp | 24 V DC (20.4-28.8 VDC) |
| Kích thước (RxCxS) | 25x290x210 mm |
| Trọng lượng | 600 g |
Chi tiết thông số kỹ thuật 6ES7422-7BL00-0AB0
Tải về datasheet (pdf): Tại đây!
| Supply voltage | |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 20.4 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| Input current | |
| from load voltage L+ (without load), max. | 120 mA |
| from backplane bus 5 V DC, max. | 200 mA |
| Power loss | |
| Power loss, typ. | 8 W |
| Digital outputs | |
| Number of digital outputs | 32 |
| Short-circuit protection | Yes; Clocked electronically |
| ● Response threshold, typ. | 0.75 to 1.5 A |
| Limitation of inductive shutdown voltage to | L+ (-45 V) |
| Controlling a digital input | Yes; possible |
| Switching capacity of the outputs | |
| ● on lamp load, max. | 5 W |
| Load resistance range | |
| ● lower limit | 48 Ω |
| ● upper limit | 4 kΩ |
| Output voltage | |
| ● for signal “1”, min. | L+ (-0.8 V) |
| Output current | |
| ● for signal “1” rated value | 0.5 A |
| ● for signal “1” permissible range, min. | 5 mA |
| ● for signal “1” permissible range, max. | 600 A |
| ● for signal “0” residual current, max. | 0.5 mA |
| Parallel switching of two outputs | |
| ● for uprating | Yes; possible (only outputs of the same group) |
| ● for redundant control of a load | Yes; possible (only outputs of the same group) |
| Switching frequency | |
| ● with resistive load, max. | 100 Hz |
| ● with inductive load, max. | 2 Hz |
| ● with inductive load (acc. to IEC 60947-5-1, DC13), max. | 2 Hz |
| ● on lamp load, max. | 2 Hz |
| Total current of the outputs (per group) | |
| all mounting positions | |
| — up to 40 °C, max. | 4 A |
| — up to 60 °C, max. | 2 A |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes; Parameterizable |
| Alarms | |
| ● Diagnostic alarm | Yes; Parameterizable |
| ● Hardware interrupt | Yes; Parameterizable |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| ● Wire-break | Yes; <0.15 mA |
| ● Short-circuit | Yes; > 1 A (typ.) |
| Diagnostics indication LED | |
| ● internal fault INTF (red) | Yes |
| ● external fault EXTF (red) | Yes |
| ● Status indicator digital output (green) | Yes |
| Potential separation | |
| Potential separation digital outputs | |
| ● between the channels | Yes |
| ● between the channels, in groups of | 8 |
| ● between the channels and backplane bus | Yes |
| Isolation | |
| Isolation tested with | 500 V DC |
| Dimensions | |
| Width | 25 mm |
| Height | 290 mm |
| Depth | 210 mm |
| Weights | |
| Weight, approx. | 600 g |
Phân phối & báo giá 6ES7422-7BL00-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7422-7BL00-0AB0 thì hãy liên hệ SiemensIM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.