SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code CC20, channel diagnosis
6ES7132-6FD00-0CU0 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC. DQ 4×24…230 VAC/2A HF SIMATIC ET 200SP 6ES7132-6FD00-0CU0 được SIEMENSIM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6FD00-0CU0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6ES7132-6FD00-0CU0
| Mã sản phẩm | 6ES7132-6FD00-0CU0 |
| Dòng sản phẩm | SIMATIC ET 200SP, DQ 4×24 … 230 V AC/2 A HF |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu ra số | DQ 4x 24..230V AC/2A HF |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (RxCxS) | 20 x 73 x 58 mm |
| Trọng lượng | 50 g |
Chi tiết thông số kỹ thuật 6ES7132-6FD00-0CU0
Tải về datasheet (pdf): Tại đây!
| General information | |
| Product type designation | DQ 4×24 … 230 V AC/2 A HF |
| HW functional status | From FS03 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type U0 |
| Color code for module-specific color identification plate | CC20 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 |
| ● STEP 7 configurable/integrated from version | STEP 7 V5.5 or higher |
| ● PROFIBUS from GSD version/GSD revision | GSD as of Revision 5 |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | Yes |
| ● PWM | No |
| ● Oversampling | No |
| ● MSO | No |
| ● Phase control | Yes; Control area: 8.5 … 100% of the phase angle |
| ● Trailing-edge phase | No |
| ● Half-wave | Yes |
| ● Full-wave | Yes |
| Supply voltage | |
| Rated value (AC) | 230 V; 47 … 63 Hz, max. rate of change of frequency 1 mHz/s |
| permissible range, lower limit (AC) | 20.4 V |
| permissible range, upper limit (AC) | 264 V |
| Input current | |
| Current consumption (rated value) | 8 mA; without load |
| Output voltage | |
| Rated value (AC) | 230 V; 24V AC to 230V AC |
| Power loss | |
| Power loss, typ. | 9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz |
| Address area | |
| Address space per module | |
| ● Inputs | + 1 byte for QI information |
| ● Outputs | 8 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type U0 |
| ● 2-wire connection | BU type U0 |
| ● 3-wire connection | BU type U0 + Potential distributor module |
| Digital outputs | |
| Number of digital outputs | 4 |
| Current-sinking | No |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | No; external fusing necessary |
| Open-circuit detection | Yes; channel by channel |
| ● Response threshold, typ. | 1 mA; 40 V AC or more |
| Overload protection | No; A miniature fuse with 10 tripping current and tripping characteristic “quick response” must be provided in the module supply |
| Controlling a digital input | Yes |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 2 A; Max. 4 A, see additional description in manual |
| ● with inductive load, max. | 2 A |
| ● on lamp load, max. | 100 W; Tungsten rating in accordance with UL; for thermistors with higher power ratings, see the notes in the manual |
| Output voltage | |
| ● for signal “1”, min. | 20.4 V |
| Output current | |
| ● for signal “1” rated value | 2 A |
| ● for signal “1” permissible range, min. | 10 mA |
| ● for signal “1” permissible range, max. | 4 A; note derating data in the manual |
| ● for signal “0” residual current, max. | 3 mA |
| Output delay with resistive load | |
| ● “0” to “1”, max. | 40 ms; 2 AC cycles |
| ● “1” to “0”, max. | 20 ms; 1 AC cycle |
| Parallel switching of two outputs | |
| ● for logic links | No |
| ● for uprating | No |
| ● for redundant control of a load | Yes |
| Switching frequency | |
| ● with resistive load, max. | 10 Hz; Applies to DQ mode; limited by line frequency in PC mode |
| ● with inductive load (acc. to IEC 60947-5-1, AC15), max. | 10 Hz; Applies to DQ mode; limited by line frequency in PC mode |
| ● on lamp load, max. | 1 Hz; Applies to DQ mode; limited by line frequency in PC mode |
| Total current of the outputs | |
| ● Current per channel, max. | 2 A; Max. 4 A, see additional description in manual |
| ● Current per module, max. | 8 A |
| Total current of the outputs (per module) | |
| horizontal installation | |
| — up to 40 °C, max. | 8 A |
| — up to 50 °C, max. | 6 A |
| — up to 60 °C, max. | 4 A |
| vertical installation | |
| — up to 30 °C, max. | 8 A |
| — up to 40 °C, max. | 6 A |
| — up to 50 °C, max. | 4 A |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | Yes; channel by channel |
| ● Short-circuit | No |
| ● Group error | Yes |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | Yes; red Fn LED |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | No |
| Isolation | |
| Isolation tested with | 2 545 V DC/2 s (routine test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 2 000 m; On request: Installation altitudes greater than 2 000 m |
| Dimensions | |
| Width | 20 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 50 g |
Phân phối & báo giá 6ES7132-6FD00-0CU0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6FD00-0CU0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.