X

SM 521 DI 16x24VDC HF SIMATIC S7-1500 6ES7521-1BH00-0AB0

SIMATIC S7-1500, digital input module DI 16xDC 24V HF, 16 channels in groups of 16; input delay 0.05..20 ms; Input type 3 (IEC 61131); Diagnostics, hardware interrupts: Front connector (screw terminals or push-in) to be ordered separately

6ES7521-1BH00-0AB0 là mô đun mở rộng tín hiệu ngõ vào số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. SM 521 DI 16x24VDC HF SIMATIC S7-1500 6ES7521-1BH00-0AB0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7521-1BH00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6ES7521-1BH00-0AB0

Mã sản phẩm 6ES7521-1BH00-0AB0
Dòng sản phẩm SIMATIC S7-1500, SM 521
Hãng sản xuất SIEMENS
Số lượng đầu vào số 16 DI 24 V DC HF
Nguồn cung cấp 24 V DC (20.4-28.8 V DC)
Kích thước (RxCxS) 35x147x129 mm
Trọng lượng 240 g

Chi tiết thông số kỹ thuật 6ES7521-1BH00-0AB0

Tải về datasheet (pdf): Tại đây!

General information
Product type designation DI 16x24VDC HF
HW functional status from FS04
Firmware version V2.2.0
● FW update possible Yes
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode Yes
● Prioritized startup Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V13 SP1 / –
STEP 7 configurable/integrated from version V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision V1.0 / V5.1
● PROFINET from GSD version/GSD revision V2.3 / –
Operating mode
● DI Yes
● Counter Yes
● Oversampling No
● MSI Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 20 mA; with 24 V DC supply
Power
Power available from the backplane bus 1.1 W
Power loss
Power loss, typ. 2.6 W
Digital inputs
Number of digital inputs 16
Digital inputs, parameterizable Yes
Source/sink input P-reading
Input characteristic curve in accordance with IEC 61131, type 3 Yes
Digital input functions, parameterizable
● Gate start/stop Yes
● Freely usable digital input Yes
● Counter
— Number, max. 2
— Counting frequency, max. 3 kHz
— Counting width 32 bit
— Counting direction up/down Up
Input voltage
● Rated value (DC) 24 V
● for signal “0” -30 to +5 V
● for signal “1” +11 to +30V
Input current
● for signal “1”, typ. 2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.8 / 20 ms
— at “0” to “1”, min. 0.05 ms
— at “0” to “1”, max. 20 ms
— at “1” to “0”, min. 0.05 ms
— at “1” to “0”, max. 20 ms
for interrupt inputs
— parameterizable Yes
for technological functions
— parameterizable Yes
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Encoder
Connectable encoders
● 2-wire sensor Yes
— permissible quiescent current (2-wire sensor), max. 1.5 mA
Isochronous mode
Filtering and processing time (TCI), min. 80 µs; At 50 μs filter time
Bus cycle time (TDP), min. 250 µs
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Hardware interrupt Yes
Diagnoses
● Monitoring the supply voltage Yes
● Wire-break Yes; to I < 350 µA
● Short-circuit No
Diagnostics indication LED
● RUN LED Yes; green LED
● ERROR LED Yes; red LED
● Monitoring of the supply voltage (PWR-LED) Yes; green LED
● Channel status display Yes; green LED
● for channel diagnostics Yes; red LED
● for module diagnostics Yes; red LED
Potential separation
Potential separation channels
● between the channels No
● between the channels, in groups of 16
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics No
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions No
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C; From FS05
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C; From FS05
● vertical installation, max. 40 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 35 mm
Height 147 mm
Depth 129 mm
Weights
Weight, approx. 240 g

Nhà phân phối & báo giá 6ES7521-1BH00-0AB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7521-1BH00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Siemens: SIEMENSIM.COM là đơn vị cung cấp các giải pháp, dịch vụ và sản phẩm công nghiệp mang thương hiệu Siemens. Ngoài ra, chúng tôi còn được biết đến với nhiều tên gọi khác trên thị trường như: đại diện / đại lý / nhà cung cấp / nhà phân phối chính thức của Siemens tại Việt Nam.