SIMATIC ET 200SP, digital output module, DQ 4x 24 V DC/2A High Speed, Pack quantity: 1 unit suitable for BU type A0, Color code CC00, 3 alternative operating modes: DQ, Oversampling, PWM Module diagnostics
6ES7132-6BD20-0DA0 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC. DQ 4×24 VDC/2A HS SIMATIC ET 200SP 6ES7132-6BD20-0DA0 được SIEMENSIM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BD20-0DA0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6ES7132-6BD20-0DA0
| Mã sản phẩm | 6ES7132-6BD20-0DA0 |
| Dòng sản phẩm | SIMATIC ET 200SP, DQ 4×24 V DC/2 A HS |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu ra số | DQ 4x 24 V DC/2A |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (RxCxS) | 15 x 73 x 58 mm |
| Trọng lượng | 30 g |
Chi tiết thông số kỹ thuật 6ES7132-6BD20-0DA0
Tải về datasheet (pdf): Tại đây!
| General information | |
| Product type designation | DQ 4×24 V DC/2 A HS |
| HW functional status | From FS05 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC00 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | Yes; Operating modes DQ and OVS only |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | STEP 7 V15.1 or higher |
| ● STEP 7 configurable/integrated from version | via GSD as of V5.6 HF4 |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.33 |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | Yes; Valve control |
| ● PWM | Yes |
| ● Cam control (switching at comparison values) | Yes; Via MtM (module-to-module communication) |
| ● Oversampling | Yes |
| ● MSO | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption, max. | 50 mA; without load |
| Output voltage | |
| Rated value (DC) | 24 V |
| Power loss | |
| Power loss, typ. | 2.5 W; at 24 V, 25 °C, DQ mode, 2 A per channel |
| Address area | |
| Address space per module | |
| ● Inputs | 1 byte; Max. 14 bytes in the cam control operating mode |
| ● Outputs | 1 byte; Max. 16 bytes in the oversampling operating mode |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type A0 |
| ● 2-wire connection | BU type A0 |
| ● 3-wire connection | BU type A0 with AUX terminals or potential distributor module |
| ● 4-wire connection | BU type A0 + Potential distributor module |
| Digital outputs | |
| Type of digital output | Source output (PNP, current-sourcing) |
| Number of digital outputs | 4 |
| Current-sinking | No |
| Current-sourcing | Yes; Push-pull output |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes |
| ● Response threshold, typ. | 6 A |
| Limitation of inductive shutdown voltage to | M (-1 V) |
| Controlling a digital input | No |
| Digital output functions, parameterizable | |
| ● Switching tripped by comparison values | Yes |
| — Number of cam tracks, max. | 4 |
| — Number of cams per module, max. | 16 |
| — Number of cams per track, max. | 16 |
| — Supported axis types | Linear axes and rotary axes with modulo function |
| — Hysteresis | Yes |
| — Pulsed cam output | Yes |
| — Range of values for comparison values, max. | -2,147,483,648 to 2,147,483,647 (user-specific within this range) |
| ● Freely usable digital output | Yes |
| ● PWM output | Yes |
| — Number, max. | 4 |
| — Cycle duration, parameterizable | Yes; 0 ms, 0.2 ms, 0.4 ms, 0.93 ms, 1.33 ms, 4.27 ms, 10.67 ms, 21.33 ms, 34.13 ms, 59.73 ms |
| — Resolution of the duty cycle | 0.1 % |
| ● Digital output with oversampling | Yes |
| — Number, max. | 4 |
| — Values per cycle, max. | 32 |
| — Resolution, min. | 100 µs |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 2 A |
| ● on lamp load, max. | 10 W |
| Load resistance range | |
| ● lower limit | 12 Ω |
| ● upper limit | 3 400 Ω |
| Output current | |
| ● for signal “1” rated value | 2 A |
| ● for signal “0” residual current, max. | 0.1 mA |
| Output delay with resistive load | |
| ● “0” to “1”, max. | 1 µs |
| ● “1” to “0”, max. | 1 µs |
| Parallel switching of two outputs | |
| ● for uprating | No |
| Switching frequency | |
| ● with resistive load, max. | 5 kHz |
| ● with inductive load, max. | 5 kHz |
| ● on lamp load, max. | 5 kHz |
| Total current of the outputs | |
| ● Current per channel, max. | 2 A |
| ● Current per module, max. | 8 A |
| Total current of the outputs (per module) | |
| horizontal installation | |
| — up to 30 °C, max. | 8 A; DQ mode |
| — up to 40 °C, max. | 6.9 A; DQ mode |
| — up to 50 °C, max. | 4.7 A; DQ mode |
| — up to 60 °C, max. | 2.5 A; DQ mode |
| vertical installation | |
| — up to 30 °C, max. | 7.2 A; DQ mode |
| — up to 40 °C, max. | 5.6 A; DQ mode |
| — up to 50 °C, max. | 4 A; DQ mode |
| Cable length | |
| ● shielded, max. | 50 m |
| ● unshielded, max. | 50 m |
| Isochronous mode | |
| Execution and activation time (TCO), min. | 40 µs |
| Bus cycle time (TDP), min. | 125 µs |
| Jitter, max. | 1 µs |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | No |
| ● Short-circuit | Yes; Module-wise |
| ● Group error | Yes |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | No |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Suitable for safety-related tripping of standard modules | No |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 31 g |
Phân phối & báo giá 6ES7132-6BD20-0DA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BD20-0DA0 thì hãy liên hệ Siemens Industry Mall để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.