X

SM 522 DQ 8x24VDC/2A HF SIEMENS 6ES7522-1BF00-0AB0

SIMATIC S7-1500, digital output module DQ 8×24 V DC/2A HF; 8 channels in groups of 8; 8 A per group; diagnostics; substitute value: the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately

6ES7522-1BF00-0AB0 là mô đun mở rộng tín hiệu ngõ ra số cho PLC S7-1500 (CPU) do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. SM 522 DQ 8x24VDC/2A HF SIEMENS 6ES7522-1BF00-0AB0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7522-1BF00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tóm tắt thông số kỹ thuật 6ES7522-1BF00-0AB0

Mã sản phẩm 6ES7522-1BF00-0AB0
Dòng sản phẩm SIMATIC S7-1500, SM 522
Hãng sản xuất SIEMENS
Số lượng đầu ra số 8 DQ 24 V DC/2A HF
Nguồn cung cấp 24 V DC (20.4-28.8 V DC)
Kích thước (RxCxS) 35x147x129 mm
Trọng lượng 240 g

Chi tiết thông số kỹ thuật 6ES7522-1BF00-0AB0

Tải về datasheet (pdf): Tại đây!

General information
Product type designation DQ 8x24VDC/2A HF
HW functional status FS03
Firmware version V2.2.0
● FW update possible Yes
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
● Prioritized startup Yes
Engineering with
STEP 7 TIA Portal configurable/integrated from version V13 SP1 / –
● STEP 7 configurable/integrated from version V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision V1.0 / V5.1
● PROFINET from GSD version/GSD revision V2.3 / –
Operating mode
● DQ Yes
● DQ with energy-saving function Yes; with an application
● PWM Yes
● Cam control (switching at comparison values) No
● Oversampling No
● MSO Yes
● Integrated operating cycle counter Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes; through internal protection with 10 A per group
Input current
Current consumption, max. 40 mA; 20 mA per group, no output is activated.
Output voltage
Rated value (DC) 24 V
Power
Power available from the backplane bus 0.9 W
Power loss
Power loss, typ. 5.6 W; 6.8 W for PWM operation
Digital outputs
Type of digital output Transistor
Number of digital outputs 8
Current-sourcing Yes
Digital outputs, parameterizable Yes
Short-circuit protection Yes
● Response threshold, typ. 3 A
Limitation of inductive shutdown voltage to -17 V
Controlling a digital input Yes
Digital output functions, parameterizable
● Freely usable digital output Yes
● PWM output Yes
— Number, max. 2
— Cycle duration, parameterizable Yes; 2 … 100 ms continuous
— ON period, min. 0 %
— ON period, max. 100 %
— Resolution of the duty cycle 0.1 %
— Minimum pulse duration 300 µs
Switching capacity of the outputs
● on lamp load, max. 10 W
Load resistance range
● lower limit 12 Ω
● upper limit 4 kΩ
Output voltage
● for signal “1”, min. L+ (-0.8 V)
Output current
● for signal “1” rated value 2 A
● for signal “1” permissible range, max. 2.4 A; note derating specification for PWM operation
● for signal “0” residual current, max. 0.5 mA
Output delay with resistive load
● “0” to “1”, typ. 80 µs
● “0” to “1”, max. 100 µs
● “1” to “0”, typ. 300 µs
● “1” to “0”, max. 500 µs
Parallel switching of two outputs
● for logic links Yes
● for uprating No
● for redundant control of a load Yes
Switching frequency
● with resistive load, max. 100 Hz; With PWM operation: 500 Hz
● with inductive load, max. 0.5 Hz; According to IEC 60947-5-1, DC-13; max. 500 Hz with PWM operation only with external circuit; see additional description in the manual
● on lamp load, max. 10 Hz
Total current of the outputs
● Current per channel, max. 2 A; see additional description in the manual
● Current per group, max. 8 A; see additional description in the manual
● Current per module, max. 16 A; see additional description in the manual
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm Yes
● Maintenance interrupt Yes
Diagnoses
● Monitoring the supply voltage Yes
● Wire-break No
● Short-circuit Yes
● Group error Yes
Diagnostics indication LED
● RUN LED Yes; green LED
● ERROR LED Yes; red LED
● MAINT LED Yes; Yellow LED
● Monitoring of the supply voltage (PWR-LED) Yes; green LED
● Channel status display Yes; green LED
● for channel diagnostics Yes; red LED
● for module diagnostics Yes; red LED
Potential separation
Potential separation channels
● between the channels No
● between the channels, in groups of 4
● between the channels and backplane bus Yes
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions No
Suitable for safety-related tripping of standard modules Yes; From FS03
Highest safety class achievable for safety-related tripping of standard modules
● Performance level according to ISO 13849-1 PL d
● Category according to ISO 13849-1 Cat. 3
● SILCL according to IEC 62061 SILCL 2
Ambient conditions
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 35 mm
Height 147 mm
Depth 129 mm
Weights
Weight, approx. 240 g

Nhà phân phối & báo giá 6ES7522-1BF00-0AB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7522-1BF00-0AB0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Siemens: SIEMENSIM.COM là đơn vị cung cấp các giải pháp, dịch vụ và sản phẩm công nghiệp mang thương hiệu Siemens. Ngoài ra, chúng tôi còn được biết đến với nhiều tên gọi khác trên thị trường như: đại diện / đại lý / nhà cung cấp / nhà phân phối chính thức của Siemens tại Việt Nam.