SIMATIC S7-300 Outdoor Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC
6ES7307-1EA80-0AA0 là mô đun cấp nguồn cho PLC S7-300 (CPU) do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. PS 307 Outdoor 120/230VAC – 24VDC/5A 6ES7307-1EA80-0AA0 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1EA80-0AA0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6ES7307-1EA80-0AA0
| Mã sản phẩm | 6ES7307-1EA80-0AA0 |
| Dòng sản phẩm | SIMATIC S7-300, PS 307 |
| Hãng sản xuất | SIEMENS |
| Nguồn cung cấp | 120/230 V AC |
| Nguồn đầu ra | 24 V DC/ 5 A |
| Kích thước (RxCxS) | 80x125x120 mm |
| Trọng lượng | 570 g |
Chi tiết thông số kỹ thuật 6ES7307-1EA80-0AA0
Tải về datasheet (pdf): Tại đây!
| Input | |
| Input | 1-phase AC |
| ● Note | Set by means of selector switch on the device |
| supply voltage | |
| ● 1 at AC rated value | 120 V |
| ● 2 at AC rated value | 230 V |
| input voltage | |
| ● 1 at AC | 93 … 132 V |
| ● 2 at AC | 187 … 264 V |
| Wide-range input | No |
| Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
| Mains buffering | at Vin = 93/187 V |
| Mains buffering at Iout rated, min. | 20 ms; at Vin = 93/187 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 47 … 63 Hz |
| input current | |
| ● at rated input voltage 120 V | 2.1 A |
| ● at rated input voltage 230 V | 1.2 A |
| Switch-on current limiting (+25 °C), max. | 45 A |
| duration of inrush current limiting at 25 °C | |
| ● maximum | 3 ms |
| I²t, max. | 1.8 A²·s |
| Built-in incoming fuse | T 3,15 A/250 V (not accessible) |
| Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 10 A characteristic C or from 6 A characteristic D |
| Output | |
| Output | Controlled, isolated DC voltage |
| Rated voltage Vout DC | 24 V |
| ● output voltage at output 1 at DC rated value | 24 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.2 % |
| Static load balancing, approx. | 0.4 % |
| Residual ripple peak-peak, max. | 150 mV |
| Residual ripple peak-peak, typ. | 40 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 240 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 90 mV |
| product function output voltage adjustable | No |
| Output voltage setting | – |
| Status display | Green LED for 24 V OK |
| On/off behavior | No overshoot of Vout (soft start) |
| Startup delay, max. | 3 s |
| Voltage rise, typ. | 100 ms |
| Rated current value Iout rated | 5 A |
| Current range | 0 … 5 A |
| supplied active power typical | 120 W |
| short-term overload current | |
| ● on short-circuiting during the start-up typical | 20 A |
| ● at short-circuit during operation typical | 20 A |
| duration of overloading capability for excess current | |
| ● on short-circuiting during the start-up | 180 ms |
| ● at short-circuit during operation | 80 ms |
| Parallel switching for enhanced performance | No |
| Efficiency | |
| Efficiency at Vout rated, Iout rated, approx. | 84 % |
| Power loss at Vout rated, Iout rated, approx. | 23 W |
| Closed-loop control | |
| Dynamic mains compensation (Vin rated ±15 %), max. | 0.3 % |
| Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 3 % |
| Load step setting time 50 to 100%, typ. | 0.2 ms |
| Load step setting time 100 to 50%, typ. | 0.2 ms |
| setting time maximum | 5 ms |
| Protection and monitoring | |
| Output overvoltage protection | Additional control loop, shutdown at approx. 30 V, automatic restart |
| Current limitation | 5.5 … 6.5 A |
| property of the output short-circuit proof | Yes |
| Short-circuit protection | Electronic shutdown, automatic restart |
| enduring short circuit current RMS value | |
| ● maximum | 5 A |
| Safety | |
| Primary/secondary isolation | Yes |
| galvanic isolation | Safety extra low output voltage Vout according to EN 60950-1 and EN 50178, creepage distances and clearances > 5 mm |
| Protection class | Class I |
| leakage current | |
| ● maximum | 3.5 mA |
| ● typical | 0.3 mA |
| Degree of protection (EN 60529) | IP20 |
| Approvals | |
| CE mark | Yes |
| UL/cUL (CSA) approval | UL-Listed (UL 508), File E143289, CSA (CSA C22.2 No. 142) |
| Explosion protection | – |
| certificate of suitability NEC Class 2 | No |
| FM approval | – |
| CB approval | No |
| certificate of suitability EAC approval | Yes |
| Marine approval | – |
| EMC | |
| Emitted interference | EN 55011 Class A |
| Supply harmonics limitation | – |
| Noise immunity | EN 61000-6-2 |
| environmental conditions | |
| ambient temperature | |
| ● during operation | -25 … +70 °C |
| — Note | with natural convection |
| ● during transport | -40 … +85 °C |
| ● during storage | -40 … +85 °C |
| Humidity class according to EN 60721 | Climate class 3K5, transient condensation permitted |
| Mechanics | |
| Connection technology | screw-type terminals |
| Connections | |
| ● Supply input | L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded |
| ● Output | L+, M: 3 screw terminals each for 0.5 … 2.5 mm² |
| ● Auxiliary | – |
| width of the enclosure | 80 mm |
| height of the enclosure | 125 mm |
| depth of the enclosure | 120 mm |
| required spacing | |
| ● top | 50 mm |
| ● bottom | 50 mm |
| ● left | 0 mm |
| ● right | 0 mm |
| Weight, approx. | 0.57 kg |
| product feature of the enclosure housing can be lined up | Yes |
| Installation | Can be mounted onto S7 rail |
| mechanical accessories | Mounting adapter for standard mounting rail (6ES7390-6BA00-0AA0) |
| MTBF at 40 °C | 2 231 610 h |
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối và báo giá 6ES7307-1EA80-0AA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1EA80-0AA0 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.