SIMATIC PM 1507 24 V/3 A Stabilized power supply for SIMATIC S7-1500 input: 120/230 V AC, output: 24 V DC/3 A
6EP1332-4BA00 là mô đun nguồn cấp cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. PM 1507 24VDC/3A SIMATIC S7-1500 SIEMENS 6EP1332-4BA00 được SIEMENSIM.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6EP1332-4BA00 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Tóm tắt thông số kỹ thuật 6EP1332-4BA00
| Mã sản phẩm | 6EP1332-4BA00 |
| Dòng sản phẩm | SIMATIC S7-1500, PM 1507 |
| Hãng sản xuất | SIEMENS |
| Nguồn đầu vào | 120 V AV (85 … 132 V AC)/230 V AC (170 … 264 V AC) |
| Nguồn đầu ra | 24 V DC/3 A |
| Kích thước (RxCxS) | 50x147x129 mm |
| Trọng lượng | 450 g |
Chi tiết thông số kỹ thuật 6EP1332-4BA00
Tải về datasheet (pdf): Tại đây!
| Input | |
| Input | 1-phase AC |
| ● Note | Automatic range selection |
| supply voltage | |
| ● 1 at AC rated value | 120 V |
| ● 2 at AC rated value | 230 V |
| input voltage | |
| ● 1 at AC | 85 … 132 V |
| ● 2 at AC | 170 … 264 V |
| Wide-range input | No |
| Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
| Mains buffering | at Vin = 93/187 V |
| Mains buffering at Iout rated, min. | 20 ms; at Vin = 93/187 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 45 … 65 Hz |
| input current | |
| ● at rated input voltage 120 V | 1.4 A |
| ● at rated input voltage 230 V | 0.8 A |
| Switch-on current limiting (+25 °C), max. | 23 A |
| duration of inrush current limiting at 25 °C | |
| ● maximum | 3 ms |
| I²t, max. | 1.3 A²·s |
| Built-in incoming fuse | T 3,15 A/250 V (not accessible) |
| Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: 10 A characteristic B or 6 A characteristic C |
| Output | |
| Output | Controlled, isolated DC voltage |
| Rated voltage Vout DC | 24 V |
| ● output voltage at output 1 at DC rated value | 24 V |
| Total tolerance, static ± | 1 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 0.1 % |
| Residual ripple peak-peak, max. | 50 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 150 mV |
| product function output voltage adjustable | No |
| Status display | LED green for 24 V OK; LED red for error; LED yellow for stand-by |
| On/off behavior | No overshoot of Vout (soft start) |
| Startup delay, max. | 1.5 s |
| Voltage rise, typ. | 10 ms |
| Rated current value Iout rated | 3 A |
| Current range | 0 … 3 A |
| supplied active power typical | 72 W |
| short-term overload current | |
| ● on short-circuiting during the start-up typical | 12 A |
| ● at short-circuit during operation typical | 12 A |
| duration of overloading capability for excess current | |
| ● on short-circuiting during the start-up | 70 ms |
| ● at short-circuit during operation | 70 ms |
| Parallel switching for enhanced performance | Yes |
| Numbers of parallel switchable units for enhanced performance | 2 |
| Efficiency | |
| Efficiency at Vout rated, Iout rated, approx. | 87 % |
| Power loss at Vout rated, Iout rated, approx. | 11 W |
| Closed-loop control | |
| Dynamic mains compensation (Vin rated ±15 %), max. | 0.1 % |
| Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 1 % |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | 3 % |
| Load step setting time 10 to 90%, typ. | 5 ms |
| Load step setting time 90 to 10%, typ. | 5 ms |
| setting time maximum | 5 ms |
| Protection and monitoring | |
| Output overvoltage protection | Additional control loop, limitation (closed loop control) at < 28.8 V |
| Current limitation | 3.15 … 3.6 A |
| Current limitation, typ. | 3.4 A |
| property of the output short-circuit proof | Yes |
| Short-circuit protection | Electronic shutdown, automatic restart |
| Overload/short-circuit indicator | – |
| Safety | |
| Primary/secondary isolation | Yes |
| galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2 |
| Protection class | Class I |
| leakage current | |
| ● maximum | 3.5 mA |
| ● typical | 0.4 mA |
| Degree of protection (EN 60529) | IP20 |
| Approvals | |
| CE mark | Yes |
| UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289 |
| Explosion protection | IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455 |
| certificate of suitability NEC Class 2 | No |
| FM approval | Class I, Div. 2, Group ABCD, T4 |
| CB approval | Yes |
| certificate of suitability EAC approval | Yes |
| Marine approval | ABS, BV, DNV GL |
| EMC | |
| Emitted interference | EN 55022 Class B |
| Supply harmonics limitation | EN 61000-3-2 |
| Noise immunity | EN 61000-6-2 |
| environmental conditions | |
| ambient temperature | |
| ● during operation | 0 … 60 °C |
| — Note | with natural convection |
| ● during transport | -40 … +85 °C |
| ● during storage | -40 … +85 °C |
| Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
| Mechanics | |
| Connection technology | Screw-/spring clamp connection |
| Connections | |
| ● Supply input | L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² |
| ● Output | L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm² |
| product function | |
| ● removable terminal at input | Yes |
| ● removable terminal at output | Yes |
| width of the enclosure | 50 mm |
| height of the enclosure | 147 mm |
| depth of the enclosure | 129 mm |
| required spacing | |
| ● top | 40 mm |
| ● bottom | 40 mm |
| ● left | 0 mm |
| ● right | 0 mm |
| Weight, approx. | 0.45 kg |
| product feature of the enclosure housing can be lined up | Yes |
| Installation | Can be mounted onto S7-1500 rail |
| MTBF at 40 °C | 1 611 993 h |
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Nhà phân phối & báo giá 6EP1332-4BA00
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1332-4BA00 thì hãy liên hệ SIEMENS INDUSTRY MALL để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.